Residual Stress and Deformation Analysis in Machining Split Straight Bevel Gears
نویسندگان
چکیده
In the machining of split straight bevel gears, stiffness changes and internal stress are redistributed, which leads to serious deformation gear blank after machining. To rectify this problem, q finite element model is established by transforming processing information into simulation calculation information, carried out. Considering material, design, process blank, characteristics laws variation during studied, mechanism law explored. Finally, experiment, measurement The results show that consistent with experiment change initial residual stress.
منابع مشابه
Geometry Definition and Contact Analysis of Spherical Involute Straight Bevel Gears
A practical application of the spherical involute surface to the forged straight bevel gears is provided and demonstrated in this work. Conjugate (pure involute) theoretical surfaces are developed from the input design parameters. The surfaces are modified to suit the actual application (automotive differential). The unloaded (or low load) tooth contact analysis of modified surfaces is performe...
متن کاملgeometry definition and contact analysis of spherical involute straight bevel gears
a practical application of the spherical involute surface to the forged straight bevel gears is provided and demonstrated in this work. conjugate (pure involute) theoretical surfaces are developed from the input design parameters. the surfaces are modified to suit the actual application (automotive differential). the unloaded (or low load) tooth contact analysis of modified surfaces is performe...
متن کاملThe Mathematical Model of Spiral Bevel Gears - A Review
The spiral bevel gear (SBG), with its high contact ratio, high strength and smooth driving, is widely used to transmit dynamic power in various mechanical products, including vehicles, mining machinery, aerospace engineering, and helicopters [1] to [4]. Typical SBGs are shown in Figs. 1a and b. The SBG has been a subject of research for almost a century, and there is a significant amount of lit...
متن کاملAn enhanced analytical model for residual stress prediction in machining
The predictions of residual stresses are most critical on the machined aerospace components for the safety of the aircraft. In this paper, an enhanced analytic elasto-plastic model is presented using the superposition of thermal and mechanical stresses on the workpiece, followed by a relaxation procedure. Theoretical residual stress predictions are verified experimentally with X-ray diffraction...
متن کاملFinite Element Modeling to Verify Residual Stress in Orthogonal Machining
The aim of this thesis paper, to create a numerical model to examine the residual stresses induced by orthogonal machining in the finished work piece and the model is validated by comparing with experimental result. The finite element method is used to simulate and analyze the residual stresses induced by a orthogonal metal cutting process. A Dynamics explicit time integration technique with Ar...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Strojniški vestnik
سال: 2021
ISSN: ['2536-3948', '0039-2480']
DOI: https://doi.org/10.5545/sv-jme.2020.7064