Residual oil cracking with generation of hydrogen (Part 3). Behavior of sulfur in residual oil cracking process.
نویسندگان
چکیده
منابع مشابه
Sulfur distribution in the oil fractions obtained by thermal cracking of Jordanian El-Lajjun oil Shale
The extracted shale oil by the thermal cracking process of the El-Lujjan oil shale showed that the yield of oil was around 12 wt%. The amount of sulfur in this shale oil was found to increase (from 7 to 9.5 wt%) with the increase of the boiling point for different distillate fractions. Sulfur in Jordanian oil shale was found to be mainly organic sulfur with negligible amounts of inorganic sulfu...
متن کاملsuppression of coke formation in thermal cracking by coke inhibitors
the main purpose of this research was to:1.develop a coking model for thermal cracking of naphtha.2.study coke inhibition methods using different coke inhibitors.developing a coking model in naphtha cracking reactors requires a suitable model of the thermal cracking reactor based on a reliable kinetic model.to obtain reliable results all these models shall be solved simultaneously.for this pu...
15 صفحه اولHydrogen Assisted Cracking in Pearlitic Steel Rods: The Role of Residual Stresses Generated by Fatigue Precracking
Stress corrosion cracking (SCC) of metals is an issue of major concern in engineering since this phenomenon causes many catastrophic failures of structural components in aggressive environments. SCC is even more harmful under cathodic conditions promoting the phenomenon known as hydrogen assisted cracking (HAC), hydrogen assisted fracture (HAF) or hydrogen embrittlement (HE). A common way to as...
متن کاملKinetics of Palm Oil Cracking in Batch Reactor
The kinetics of palm oil catalytic cracking over aluminum containing mesoporous silica Al-MCM-41 (5% Al) was investigated in a batch autoclave reactor at the temperatures range of 573 – 673 K. The catalyst was prepared by using sol-gel technique and has been characterized by nitrogen adsorption and x-ray diffraction methods. Surface area of 1276 m/g with average pore diameter of 2.54 nm and por...
متن کاملInvestigation on Indentation Cracking-Based Approaches for Residual Stress Evaluation
Vickers indentation fracture can be used to estimate equibiaxial residual stresses (RS) in brittle materials. Previous, conceptually-equal, analytical models were established on the assumptions that (i) the crack be of a semi-circular shape and (ii) that the shape not be affected by RS. A generalized analytical model that accounts for the crack shape and its change is presented. To assess these...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of The Japan Petroleum Institute
سال: 1983
ISSN: 0582-4664
DOI: 10.1627/jpi1958.26.181