Reinforcement of SiC whiskerAl2O3 particle/6061 aluminum alloy composite materials.
نویسندگان
چکیده
منابع مشابه
Through-tiiickness Elastic Constant for Aramid-epoxy/aluminum Composite Materials*
The objectives in this study were to deterrnine the through-thickness elastic constant of fiber-epoxy/metal composites with ultrasonic measurements and determine the elastic constants of the constituent layers. The specimens that we studied consist of alternaring layers of aluminum (2024 TI) and fiber-epoxy [1], all of which are 200 to 300 jlm thick. As Figure 1 indicates the outer two layers o...
متن کاملEFFECT OF AGING CONDITION ON STRUCTURE AND THE PROPERTIES OF Al-ALLOY / SiC COMPOSITE
The heat treatments have been designed to vary the matrix microstructure in P/M processed SiC reinforced 7xxx Aluminum alloys to determine the effects of matrix microstructure, interface behavior on the mechanical properties. Smooth tensile, notched bend tests were performed. The results conclude that the clustered regions have been observed as preferred initiation sites in both tensile and not...
متن کاملTemperature Effect on Creep and Fracture Behaviors of Nano-SiO2-composite and AlSi12Cu3Ni2MgFe Aluminum Alloy
In the presented article, the temperature effect was studied on creep properties and fracture behaviors of AlSi12Cu3Ni2MgFe aluminum-silicon alloys, unreinforced and reinforced with SiO2 nano-particles. For such objective, standard specimens were fabricated by gravity casting and stir-casting methods, for aluminum alloys and nano-composites, respectively. Then, force-controlled creep...
متن کاملEffect of Particle Volume Fraction on the Tensile Properties of Composite Al6061/SiC Materials by Hot Extrusion
In the present study the effect of phase volume fraction on the reinforcement of microstructure and tensile properties of composite extrusion process Al6061/SiC has been studied. For this purpose, the base alloy Al6061 using pure aluminum ingots, silicon, of Al-50% Mg, Al-10% Cr and a thin copper rod was prepared. Next, the composite Al6061/5% SiC, Al6061/10% SiC, Al6061/15% SiC and Al6061/20% ...
متن کاملTin (II) Chloride a Suitable Wetting Agent for AA1200 - SiC Composites
SiC reinforced Aluminum samples were produced by stir casting of liquid AA1200 aluminum alloy at 600-650oC casting temperature. 83μm SiC particles were rinsed in 10g/l, 20g/l and 30g/l molar concentration of Sncl2 through cleaning times of 0, 60, 120, and 180 minutes. Some cast samples were tested for mechanical properties and some were subjected to heat treatment before testing. The SnCl2 rins...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Japan Institute of Light Metals
سال: 1992
ISSN: 0451-5994
DOI: 10.2464/jilm.42.377