Recyclability of Ceramic Siding Waste Powder by Heat Treatment

Effect on Surface Temperature Reduction of Asphalt Pavements with Cement–Based Materials Containing Ceramic Waste Powder

―Analysis Of The Strength And Durability Of The Concrete With Partially Replaced By The Ceramic Slurry Waste Powder‖

Ceramic waste is most commonly produce from ceramic industry, this waste is in the form of pest and hard form, pest waste is known as the filter waste or slurry waste, which is produced at the end of polishing and finishing of ceramic tiles. The paper discuss that ceramic slurry waste powder is replaced by cement in concrete. Concrete grade M25 was made by replacing by 0% to 30% of Ordinary Por...

Synthesis of Hydroxyapatite Bio-Ceramic Powder by Hydrothermal Method

Hydroxyapatite bio-ceramic powder was synthesized using waste eggshells as calcium source by a straight forward thermal method. The process is carried out at high temperature. Different calcium phosphate phases were obtained just by changing the thermal treatment. HAp is the only apatite present in the reaction products, along with minute fractions of other calcium compounds. The final product ...

EFFECT OF T6 HEAT TREATMENT ON MECHANICAL PROPERTIES OF CERAMIC REINFORCED CASTED ALUMINUM ALLOY

Aluminium base alloy (Al-Cu-Si) was reinforced with silicon carbide (SiC) particles, in various percentage compositions from 0-20 wt%. Silicon carbide particle size of 20µm was selected. The molten slurry of SiC reinforced base aluminium metal was casted through green and dry sand casting methods and solidification process was carried out under ambient conditions. A selected population...

Rheology of Ceramic-powder-filled Polymer Melts

Ceramic powder (zirconia) was mixed with binder consisting polypropylene, paraffin and stearic acid in elastic extruder. Steady and oscillatory shear flow properties of these materials in the molten state were measured on a cone-plate rheometer; parallel superposed steady and oscillatory shear flow experiments were also carried out. Moreover, flow properties at high shear rates were measured on...