Recovery Process of Li, Al and Si from Lepidolite by Leaching with HF
نویسندگان
چکیده
منابع مشابه
Removal of B from Si by Hf addition during Al–Si solvent refining process
A small amount of Hf was employed as a new additive to improve B removal in the electromagnetic solidification refinement of Si with an Al-Si melt, because Hf has a very strong affinity for B. The segregation ratio of Hf between the solid Si and Al-Si melt was estimated to range from 4.9 × 10-6 to 8.8 × 10-7 for Al concentrations of 0 to 64 at.%, respectively. The activity coefficient of Hf in ...
متن کاملComparison of Processes for Lithium Recovery from Lepidolite by H2SO4 Digestion or HCl Leaching
Lithium is becoming a strategic metal due to its important applications in secondary battery electrodes used in electronic appliances and also in electric traction vehicles. Lithium primary resources are brines and rock minerals, the former being nowadays almost exclusively used in the production of lithium commodities. With the expected increase in lithium demand, the development of competitiv...
متن کاملMicrobiological Leaching of Al from the Waste of Bayer Process by Some Selective Fungi
In present investigation the biological leaching of aluminum by isolated fungi from red mud, the main waste product of the alkaline extraction of Al from bauxite was studied. Biological leaching experiments were carried out using indigenous, date and orange specimen fungi, Aspergillus Niger, Penicillium simplicissimum notatum. Savored Dextrose chloramphenicol Agar (SDA) wa...
متن کاملExtraction of Lithium from Lepidolite Using Mixed Grinding with Sodium Sulfide Followed by Water Leaching
Mixed grinding with Na2S followed by water leaching was performed to extract Li from lepidolite. The leachability of Li increases dramatically in the ground mixture, regardless of the mixing ratio over the range of 1:1 to 3:1, while only 4.53% of Li was extracted in lepidolite ground without Na2S. The leachability increased with an increase of the grinding time, and ultimately, 93% of the Li wa...
متن کاملcopper and nickel recovery from electroplating sludge by the process of acid-leaching and electro-depositing
in this work, we developed a method which combined the processes of acid-leaching, ammonium jarosite precipitating and electro-depositing to recover copper and nickel from electroplating sludge. residual sludge from an electroplating plant located in qingdao was used for acid-leaching, and more than 95% of copper, nickel, zinc, chromium and iron were extracted from the sludge. after acid-leachi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Minerals
سال: 2017
ISSN: 2075-163X
DOI: 10.3390/min7030036