Push-out Tests for Determining Shear Strength and Stiffness of Perfobond Connector-Experimental Study
نویسندگان
چکیده
منابع مشابه
Push-out tests on shear studs in high strength concrete
A lot of push-out tests of shear studs embedded in normal strength concrete were conducted. So current design code methods of the shear studs are based on the test results of studs embedded in normal strength concrete. It also appeared that the strength of connector and the concrete strength are the main factors affecting the behavior of shear connections. But push-out test data of studs embedd...
متن کاملExperimental Study on the Effect of Crumb Rubber on Shear Strength of Sandy Soil
Nowadays, soil reinforcement using polymer elements have been investigated by a number of researchers in order to increase the load capacity of soils. Reinforcing soils using fibers is a method of soil improvement, which offers a homogenous mixture in combination with soils, regarding their tensile strength. This combination maintains pressure loading capacity and properties in mutual resistant...
متن کاملsimulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
evaluation of stiffness and strength degradations coefficient (c2) for rc building with shear walls
recently, scientists developed the seismic rehabilitation of structures and their points of view were changed from strength to the performance of structures. nonlinear static procedure (nsp) or pushover analysis is a new method that is chosen for its speed and simplicity in calculations. “seismic rehabilitation code” & fema356 considered this method. result of this analysis is a target displace...
متن کاملAdhesion of an Endodontic Sealer to Dentin and Gutta-percha: Shear and Push-out Bond Strength Measurements and Sem Analysis
The use of an adequate method for evaluation of the adhesion of root canal filling materials provides more reliable results to allow comparison of the materials and substantiate their clinical choice. The aims of this study were to compare the shear bond strength (SBS) test and push-out test for evaluation of the adhesion of an epoxy-based endodontic sealer (AH Plus) to dentin and gutta-percha,...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Al-Qadisiyah Journal for Engineering Sciences
سال: 2019
ISSN: 2411-7773,1998-4456
DOI: 10.30772/qjes.v12i4.639