Production Strategies of TiNx Coatings via Reactive High Power Impulse Magnetron Sputtering for Selective H2 Separation
نویسندگان
چکیده
منابع مشابه
Hysteresis-free reactive high power impulse magnetron sputtering
High power impulse magnetron sputtering (HIPIMS) of an Al target in Ar/O2 mixtures has been studied. The use of HIPIMS is shown to drastically influence the process characteristics compared to conventional sputtering. Under suitable conditions, oxide formation on the target as the reactive gas flow is increased is suppressed, and the hysteresis effect commonly observed as the gas flow is varied...
متن کاملSiNx Coatings Deposited by Reactive High Power Impulse Magnetron Sputtering: Process Parameters Influencing the Nitrogen Content.
Reactive high power impulse magnetron sputtering (rHiPIMS) was used to deposit silicon nitride (SiNx) coatings for biomedical applications. The SiNx growth and plasma characterization were conducted in an industrial coater, using Si targets and N2 as reactive gas. The effects of different N2-to-Ar flow ratios between 0 and 0.3, pulse frequencies, target power settings, and substrate temperature...
متن کاملHigh power impulse magnetron sputtering discharge
J. T. Gudmundsson, N. Brenning, Daniel Lundin and Ulf Helmersson, High power impulse magnetron sputtering discharge, 2012, Journal of Vacuum Science & Technology. A. Vacuum, Surfaces, and Films, (30), 030801. http://dx.doi.org/10.1116/1.3691832 Copyright: American Vacuum Society, This article may be downloaded for personal use only. Any other use requires prior permission of the author and the ...
متن کاملLow-temperature growth of boron carbide coatings by direct current magnetron sputtering and high-power impulse magnetron sputtering
access at Springerlink.com ABSTRACT B4C coatings for B-based neutron detector applications were deposited using high-power impulse magnetron sputtering (HiPIMS) and direct current magnetron sputtering (DCMS) processes. The coatings were deposited on Si(001) as well as on flat and macrostructured (grooved) Al blades in an industrial coating unit using B4C compound targets in Ar. The HiPIMS and D...
متن کاملOff-normal Film Growth by High Power Impulse Magnetron Sputtering
In this study we contribute towards establishing the process-microstructure relationships in thin films grown off-normally by ionized physical vapor deposition. High power impulse magnetron sputtering (HiPIMS) is used at various peak target powers and deposition rates to grow copper (Cu) and chromium (Cr) films from a cathode placed at an angle 90 degrees with respect to the substrate normal. F...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Membranes
سال: 2021
ISSN: 2077-0375
DOI: 10.3390/membranes11050360