Production of TiO2 Coated Multiwall Carbon Nanotubes by the Sol-Gel Technique
نویسندگان
چکیده
منابع مشابه
Detecting compressive strain by evaluation of Raman spectroscopy of the multiwall Carbon nanotubes/TiO2 nanocomposites
Functionalized Multi-walled carbon nanotubes (f-MWCNTs) which are modified using nitric acid and sulfuric acid were evaluated to synthesize a uniform nanocomposite via application of TiO2. The f-MWCNTs-TiO2 nanocomposites have been produced via using the chemical simple two-step method. To characterize the structural analysis, scanning electron microscopy...
متن کاملthe sol–gel technique
The sol–gel technique is a highly flexible technique for fabrication of oxide glasses, and various researchers have previously reported fluorescence studies of Er-doped sol–gel films and monoliths. Here we report the fabrication of Er-doped strip-loaded sol–gel silicate waveguides, using a silica–titania–alumina host composition, and Er concentrations up to f1.1=10 Er rcm, for possible applicat...
متن کاملDispersing and functionalizing multiwalled carbon nanotubes in TiO2 sol.
We report that oxidized multiwalled carbon nanotubes (MWCNTs) can be synchronously dispersed and functionalized in TiO2 sol via an in situ sol-gel process. Transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), Raman spectroscopy, and atomic force microscopy (AFM) were used to characterize the functionalized MWCNTs. The results revealed that the hydrolysis and condensat...
متن کاملThe production of Ceramic Thin Films by Sol-Gel Method
The purpose of this work was to production of ceramic thin films by using of Sol-Gel process. For this purpose deposition of SiO2 on substrates of soda-lime glasses has been carried out. Coating treatments on prepared specimen were conducted in a Sol solution by means of dipping at various times. After drying and performing appropriate heat treatment on each sample, the thickness of coated laye...
متن کاملThe production of Ceramic Thin Films by Sol-Gel Method
The purpose of this work was to production of ceramic thin films by using of Sol-Gel process. For this purpose deposition of SiO2 on substrates of soda-lime glasses has been carried out. Coating treatments on prepared specimen were conducted in a Sol solution by means of dipping at various times. After drying and performing appropriate heat treatment on each sample, the thickness of coated laye...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials Research
سال: 2017
ISSN: 1980-5373,1516-1439
DOI: 10.1590/1980-5373-mr-2017-0406