Printability and Microstructure of Selective Laser Melting of WC/Co/Cr Powder
نویسندگان
چکیده
منابع مشابه
On model of microstructure formation during selective laser melting of metal powder bed
A model of phase field has been developed to investigate the microstructure evolution during selective laser melting (SLM) of metal powder bed. A two-component (degree of order, orientation field) ordering parameter has been used, for which the permissive relationships have been derived reasoning from the principle of entropy production positivity. The application of this principle has made pos...
متن کاملEffect of Layer Thickness in Selective Laser Melting on Microstructure of Al/5 wt.%Fe2O3 Powder Consolidated Parts
In situ reaction was activated in the powder mixture of Al/5 wt.%Fe2O3 by using selective laser melting (SLM) to directly fabricate aluminium metal matrix composite parts. The microstructural characteristics of these in situ consolidated parts through SLM were investigated under the influence of thick powder bed, 75 μm layer thickness, and 50 μm layer thickness in various laser powers and sca...
متن کاملAn Overview of Densification, Microstructure and Mechanical Property of Additively Manufactured Ti-6Al-4V — Comparison among Selective Laser Melting, Electron Beam Melting, Laser Metal Deposition and Selective Laser Sintering, and with Conventional Powder Metallurgy
This chapter begins with an introduction of the fundamental properties of Ti-6Al-4V, and its densification mechanism, typical microstructure and mechanical property achievable by conventional PM routes. This functions as a point of reference for the following discussion of the AM Ti-6Al-4V in terms of densification, microstructure, and mechanical property. The mostly popular laser-based AM tech...
متن کاملassessment of deep word knowledge in elementary and advanced iranian efl learners: a comparison of selective and productive wat tasks
testing plays a vital role in any language teaching program. it allows teachers and stakeholders, including program administrators, parents, admissions officers and prospective employers to be assured that the learners are progressing according to an accepted standard (douglas, 2010). the problems currently facing language testers have both practical and theoretical implications but the first i...
Selective laser melting of titanium alloy: investigation of mechanical properties and microstructure
This article presents the mechanical properties and microstructure of titanium alloy after selective laser melting (SLM). Titanium alloys are ideal material for selective laser melting (SLM), because they are expensive and difficult to machinery using traditional technologies. The application of SLM in the biomedical area has been slow due to the stringent performance criteria and concerns rela...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials
سال: 2019
ISSN: 1996-1944
DOI: 10.3390/ma12152397