Preparation of Supersaturated Fe-In Alloy Thin Films by Ion-Plating Process
نویسندگان
چکیده
منابع مشابه
Lateral alloy segregation in thin heteroepitaxial films
Alloy segregation is believed to be an important factor in the growth of the wetting layer and subsequent formation of islands during heteroepitaxy. We report simulated annealing results that determine the lowestenergy configuration of a strained system. Our results indicate that in addition to vertical segregation, there is also an energetic driving force for lateral segregation and formation ...
متن کاملAPPLICATIONS OF AMORPHOUS Fe-, CO-METALLOID AND RARE EARTH ALLOY THIN FILMS
Amorphous thin films of transition metal (TM)-metalloid and TM-rare earth (R) alloys have been prepared by sputtering and multiple-target, electron-beam vapor deposition. Application of these has been made in several technically important areas including continuously variable surface acoustic wave (SAW) delay lines or resonators and magneto-optic mirrors for biasing ringlaser-gyroscopes (RLG). ...
متن کاملAgInSe2 thin films prepared by electrodeposition process
In this work, the one step electrodeposition process was used to prepare Ag-In-Se thin films. The films were deposited at room temperature from a bath containing 1-3x10 M AgNO3, 6x10 -2 M InCl3 and 3x10 -2 M of H2SeO3. The KSCN at a concentration of 0.681 M was used as complexing agent. The pH value of the solution was 1.4. Applied potentials to SCE were chosen between -0.3 V and -1.1 V. Films ...
متن کاملPreparation and luminescent properties of Eu- doped BaTiO3 thin films by sol–gel process
Eu-doped BaTiO3 thin films with a pseudo-cubic perovskite structure were successfully fabricated on magnesia substrates at low temperature by using a high-concentration sol–gel process, in which the newly developed gel-aging process on substrate was employed. Film microstructure, crystallinity, sintering properties and photoluminescence (PL) were investigated. The xerogel thin films exhibited s...
متن کاملPreparation of (Pb,Ba)TiO3 powders and highly oriented thin films by a sol-gel process
Solid solution Pb1-xBaxTiO3, with particular emphasis on Pb0.5Ba0.5TiO3, was prepared using a sol-gel process incorporating lead acetate trihydrate, barium acetate, and titanium isopropoxide as precursors, acetylacetone (2,4 pentanedione) as a chelating agent, and ethylene glycol as a solvent. The synthesis procedure was optimized by systematically varying acetylacetone: Ti and H2O:Ti molar rat...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Institute of Metals and Materials
سال: 2013
ISSN: 0021-4876,1880-6880
DOI: 10.2320/jinstmet.jbw201210