Preparation of Microcapsules Containing Water-Absorbent Polymer and Silicon Carbide Powder
نویسندگان
چکیده
منابع مشابه
Preparation and Characterization of Continuous Fe-Containing Silicon Carbide Radar Absorbing Fibers from Precursor-Based Processing
A new polymer polyferrocarbosilane (PFCS) was synthesized using polydimethylsilane and ferrocene as the raw materials. The polymer was then melt-spun into continuous PFCS fibers, cured in air and heat-treated in a nitrogen atmosphere up to 1300 , a kind of Fe-containing SiC fibers were finally obtained. The SiC(Fe) ceramic fibers were combined with epoxy resin and a structural material was prep...
متن کاملMicrowave synthesis of phase-pure, fine silicon carbide powder
Fine, monophasic silicon carbide powder has been synthesized by direct solid-state reaction of its constituents namely silicon and carbon in a 2.45 GHz microwave field. Optimum parameters for the silicon carbide phase formation have been determined by varying reaction time and reaction temperature. The powders have been characterized for their particle size, surface area, phase composition (X-r...
متن کاملFinite Element Modeling of the Vibrational Behavior of Single-Walled Silicon Carbide Nanotube/Polymer Nanocomposites
The multi-scale finite element method is used to study the vibrational characteristics of polymer matrix reinforced by single-walled silicon carbide nanotubes. For this purpose, the nanoscale finite element method is employed to simulate the nanotubes at the nanoscale. While, the polymer is considered as a continuum at the larger scale. The polymer nanotube interphase is simulated by spring ele...
متن کاملPreparation, Characterization, and Modeling of Nanoporous Silicon Carbide Membranes
Silicon carbide (SiC) is a promising material for the preparation of high temperature membranes [1-5] due to its many unique properties such as high thermochemical stability, high thermal conductivity and resistance to abrasion. In our studies, SiC microporous membranes are fabricated using two different techniques. The first approach involves the pyrolysis of pre-ceramic polymeric films [3,4],...
متن کاملPolymer-Cement Composites Containing Waste Perlite Powder
Polymer-cement composites (PCCs) are materials in which the polymer and mineral binder create an interpenetrating network and co-operate, significantly improving the performance of the material. On the other hand, the need for the utilization of waste materials is a demand of sustainable construction. Various mineral powders, such as fly ash or blast-furnace slag, are successfully used for the ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Society of Colour Material
سال: 1994
ISSN: 0010-180X
DOI: 10.4011/shikizai1937.67.300