Preparation of CoP films by ultrasonic electroless deposition at low initial temperature
نویسندگان
چکیده
منابع مشابه
Growth and Characterization of Thin MoS2 Films by Low- Temperature Chemical Bath Deposition Method
Transition metal dichalcogenide (TMDC) materials are very important inelectronic and optical integrated circuits and their growth is of great importance in thisfield. In this paper we present growth and fabrication of MoS2 (Molibdan DiSulfide)thin films by chemical bath method (CBD). The CBD method of growth makes itpossible to simply grow large area scale of the thin la...
متن کاملLow Temperature Deposition SiO2 Films by SAPCVD
A Subatmospheric Pressure Chemical Vapor Deposition (SAPCVD) system was implemented for SiO2 nanometric films deposition on silicon substrates. Tetraethoxysilane (TEOS) and ozone (O3) were used as precursors and they were mixed into the SAPCVD system at 590 Torr. The deposition temperatures ranged from 140 to 265 o C and the deposition time ranged from 1 to 15 min. The measured thicknesses from...
متن کاملNanostructured Iron-nickel Thin Films Synthesized by Electroless Polyol Deposition
FexNi100-x thin films were deposited on conductive (Cu) and non-conductive (Pd activated glass) substrate using an electroless, polyol method. The stoichiometry of film composition, as compared to the precursor concentration, strongly depended on the substrate position. When the substrate was immersed in the refluxing solution, Fe-deficient films were deposited. However Fe-rich films were synth...
متن کاملEffect of growth time on ZnO thin films prepared by low temperature chemical bath deposition on PS substrate
ZnO thin films were successfully synthesized on a porous silicon (PS) substrate by chemical bathdeposition method. X-ray diffraction (XRD), field-emission scanning electron microscopy (FESEM),and photoluminescence (PL) analyses were carried out to investigate the effect of growth duration(3, 4, 5, and 6 h) on the optical and structural properties of the aligned ZnO nanorods. T...
متن کاملLow temperature deposition: Properties of SiO2 films from TEOS and ozone by APCVD system
An Atmospheric Pressure Chemical Vapor Deposition (APCVD) system was implemented for SiO2 nanometric films deposition on silicon substrates. Tetraethoxysilane (TEOS) and ozone (O3) were used and they were mixed into the APCVD system. The deposition temperatures were very low, from 125 to 250 C and the deposition time ranged from 1 to 15 minutes. The measured thicknesses from the deposited SiO2 ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Progress in Natural Science: Materials International
سال: 2014
ISSN: 1002-0071
DOI: 10.1016/j.pnsc.2014.04.004