Preparation of Alumina Ceramics with Uniformly Dispersed Micropores
نویسندگان
چکیده
منابع مشابه
Mullite-alumina functionally gradient ceramics
Cracks free mullite-alumina Functionally Gradient Ceramics (FGC) have been obtained by sequential slip casting of Mullite-alumina slurries with diserent mullite/alumina ratios. These slurries were prepared with 65 % solids content and viscosities rangingpom 10 to 40 mPa.s. 7he presence of cracks perpendicular to the FGC layers have been attributed to residual stresses developed because of the m...
متن کاملSurface Contamination of Alumina Ceramics by Carbon
Article history: Received: 01.05.2016. Received in revised form: 25.07.2016. Accepted: 06.09.2016. This study presents the results of investigating the cause of contamination of aluminum oxide ceramics (Al2O3) in the form of brown colored stain. Contaminated ceramic surfaces were examined with the scanning electron microscope (SEM) equipped with the Energy Dispersive Spectrometer (EDS). The res...
متن کاملHertzian Contact Damage in Porous Alumina Ceramics
A study has been made of Hertzian contact damage in compressive shear stress field beneath the contact area. The observed microcrack density increases with grain size, porous and dense liquid-phase-sintered aluminas. Indentation stress–strain curves show increasing nonlinearity as the implying a threshold microstructural scale for crack initiation. In contrast, the micromechanisms controlling f...
متن کاملChain conformation in polymer nanocomposites with uniformly dispersed nanoparticles.
The effect of nanoparticles (NP) on chain dimensions in polymer melts has been the source of considerable theoretical and experimental controversy. We exploit our ability to ensure a spatially uniform dispersion of 13 nm silica NPs miscible in polystyrene melts, together with neutron scattering, x-ray scattering, and transmission electron microscopy, to show that there is no measurable change i...
متن کاملMicrostructural Alterations in Alumina Ceramics Associated with Ballistic Impact Events
Surface topography and defect structures associated with ballistic impact in a commercial 94 percent alumina ceramic armor are described. Fracture surfaces were examined by scanning electron microscopy, augmenting previous replication electron fractography studies. Direct transmission electron microscopy was employed in characterizing defect structures in extracted fracture fragments on replica...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Ceramic Society of Japan
سال: 1994
ISSN: 0914-5400,1882-1022
DOI: 10.2109/jcersj.102.149