Predicting the secondary dynamic mode interference phenomenon in thermoacoustic instability control
نویسندگان
چکیده
منابع مشابه
Thermoacoustic Instability
Continuous combustion processes are prominently encountered in many applications related to power generation, heating and propulsion. Examples include domestic and industrial burners, steam and gas turbines, waste generators, and jet and ramjet engines. Continuous combustion processes exhibit a wide range of dynamics. Of these, conditions which promote coupling with the acoustic field and resul...
متن کاملThe Origin of Secondary Peaks with Active Control of Thermoacoustic Instability
This paper deals with the generation of new peaks in the pressure spectrum in controlled combustors in experimental investigations of active control of thermoacoustic instabilities. Typically, the reported experiments have demonstrated that the dominant thermoacoustic instability can be suppressed, but secondary peaks at different frequencies which were not excited in the uncontrolled combustor...
متن کاملPreventing Instability Phenomenon in Gas-lift Optimization
One of the problems that sometimes occur in gas allocation optimization is instability phenomenon. This phenomenon reduces the oil production and damages downhole and surface facilities. Different works have studied the stability and suggested some solutions to override it, but most of them (such as making the well intelligent) are very expensive and thus they are not applicable to many cases. ...
متن کاملA Model-Based Active Control Design for Thermoacoustic Instability
Active control has been pursued vigorously for combating thermoacoustic instabilities in combustion processes. Most experimental investigations employ empirical design procedure for determining the characteristic parameters of the filter and phase-shifter of the controller. Such procedure has been observed to result in resonance at frequencies which were not excited in the power spectrum of the...
متن کاملThermoacoustic instability: model-based optimal control designs and experimental validation
Active control of thermoacoustic instability has been increasingly sought after in the past two decades to suppress pressure oscillations while maintaining other performance objectives such as low NOx emission, high efficiency and power density. Recently, we have developed a feedback model of a premixed laminar combustor which captures several dominant features in the combustion process such as...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences
سال: 2016
ISSN: 1364-5021,1471-2946
DOI: 10.1098/rspa.2016.0182