Postbuckling and failure analysis of layered composite panels

Nonlinear Finite Element Formulation for The Postbuckling Analysis of Stiffened Composite Panels with Imperfections

Postbuckling analysis of stiffened laminated composite panels, using a higher-order shear deformation theory

The investigation aims at: (i) constructing a modified higher-order shear deformation theory in which Kirchhoff's hypotheses are relaxed, to allow for shear deformations; (ii) validating the present 5-parameter-smeared-laminate theory by comparing the results with exact solutions; and (iii) applying the theory to a specific problem of the postbuckling behavior of a flat stiffened fiber-reinforc...

Optimization of Composite, Stiffened, Imperfect Panels under Combined Loads for Service in the Postbuckling Regime

Local buckling and postbuckling of panels stiffened by stringers and rings and subjected to combined in-plane loads is explored with the use of a single module model that consists of one stringer and a width of panel skin equal to the stringer spacing. The cross-section of the skin-stringer module is discretized and the displacement field is assumed to vary trigonometrically in the axial direct...

Design and Analysis of Composite Panels

European aircraft industry demands for reduced development and operating costs, by 20% and 50% in the short and long term, respectively. Contributions to this aim are provided by the completed project POSICOSS (5FP) and the running follow-up project COCOMAT (6FP), both supported by the European Commission. As an important contribution to cost reduction a decrease in structural weight can be rea...

Buckling Analysis of Spherical Composite Panels Reinforced by Carbon Nanotube

In this study, the buckling behavior of moderately thick Carbon Nano-Tube (CNT)-reinforced spherical composite panels subjected to both uniaxial and biaxial loads is examined. The uniform and various kinds of functionally graded distributions of the CNT are considered. The mechanical properties of the nanocomposite panels are estimated using the modified rule of mixture. Based on the first-orde...