Polyurethanes (Dombrow, Bernard A.); Polyamide Resins (Floyd, Donald E.); Plastic Sheet Forming (Butzko, Robert L.)

Robert L . “ A Theory

Rigid-plastic finite-element analysis of sheet-metal forming processes using a selective membrane/shell formulation

In most sheet-metal forming processes a large part of the deforming material exhibits stretch-dominant characteristics and the bending effect is found to exist only in a limited portion of the total deforming region. Thus the use of shell or continuum elements for the whole region is not economic. A selective membrane/shell (M/S) scheme is proposed which combines the layered degenerated shell e...

A Study on the Forming of Sheet Metal Parts Using Multi-Point Forming Technology

In recent years, in order to reducing die design and manufacturing costs, Multi point forming technique has gained an increasing interest because of its high flexibility. In this process, the conventional fixed shape solid die sets are replaced with a pair of opposite matrices of controllable elements. In this paper, the fundamental principles of multi-point forming was described and the possib...

A Study on the Forming of Sheet Metal Parts Using Multi-Point Forming Technology

In recent years, in order to reducing die design and manufacturing costs, Multi point forming technique has gained an increasing interest because of its high flexibility. In this process, the conventional fixed shape solid die sets are replaced with a pair of opposite matrices of controllable elements. In this paper, the fundamental principles of multi-point forming was described and the possib...

analysis of forming parameters in sheet hydro-forming process

the aim of this paper is to develop a systematic method to analyze the effects of forming parameters on the quality of part formability and determine the optimal combination of the forming parameters for the sheet hydroforming process. in this paper, the effects of four important process parameters namely fluid pressure, friction coefficient at blank/punch interface, gap between die rim block a...