Poly(acrylamide-co-acrylic acid) Gel Electrolytes for Ni-Zn Secondary Batteries
نویسندگان
چکیده
منابع مشابه
Electroplating and characterization of Zn–Ni, Zn–Co and Zn–Ni–Co alloys
a r t i c l e i n f o Zn–Ni, Zn–Co and Zn–Ni–Co coatings were electrodeposited on mild steel from an acidic chloride bath containing p-aminobenzenesulphonic acid (SA) and gelatin. These additives changed the phase content in the coatings, most likely as a result of their adsorption at the surface of the cathode. The effect of gelatin was more pronounced than that of SA. The Faradaic efficiency ...
متن کاملElectrochemistry of magnesium electrolytes in ionic liquids for secondary batteries.
The electrochemistry of Mg salts in room-temperature ionic liquids (ILs) was studied using plating/stripping voltammetry to assess the viability of IL solvents for applications in secondary Mg batteries. Borohydride (BH4(-)), trifluoromethanesulfonate (TfO(-)), and bis(trifluoromethanesulfonyl)imide (Tf2N(-)) salts of Mg were investigated. Three ILs were considered: l-n-butyl-3-methylimidazoliu...
متن کاملInterfacial Dielectric Losses in Co-Doped Ni-Zn Ferrites
The temperature and fresuency dependence of tg8 and E' for Nk ~Ztb ferrites was studied in the 10'lo6 Hz frequency range and 20-200°C temperrhrre tange. The experimental curves exhibit aspects very dependent of composition. To verify Ulat interfacial losses, expected to appear in this type of system are compatible with the experimental results a calculation of the dielectric permittivity and di...
متن کاملCheap glass fiber mats as a matrix of gel polymer electrolytes for lithium ion batteries
Lithium ion batteries (LIBs) are going to play more important roles in electric vehicles and smart grids. The safety of the current LIBs of large capacity has been remaining a challenge due to the existence of large amounts of organic liquid electrolytes. Gel polymer electrolytes (GPEs) have been tried to replace the organic electrolyte to improve their safety. However, the application of GPEs ...
متن کاملPolymer gel electrolytes for application in aluminum deposition and rechargeable aluminum ion batteries.
A polymer gel electrolyte using AlCl3 complexed acrylamide as a functional monomer and acidic ionic liquid based on a mixture of 1-ethyl-3-methylimidazolium chloride (EMImCl) and AlCl3 (EMImCl-AlCl3, 1-1.5, in molar ratio) as a plasticizer has been successfully prepared for the first time via free radical polymerization. Aluminum deposition is successfully achieved using a polymer gel electroly...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Bulletin of the Korean Chemical Society
سال: 2013
ISSN: 0253-2964
DOI: 10.5012/bkcs.2013.34.3.717