Physical and Mechanical Properties of Rural-Road Pavement Concrete in South Korea Containing Air-Cooled Blast-Furnace Slag Aggregates

نویسندگان

چکیده

The purpose of this study was to assess the physical and mechanical properties pavement concrete for rural roads South Korea made with air-cooled slag aggregate, which is an industrial byproduct. This assessed chemical according following performance requirements based on design criteria Ministry Agriculture’s Agricultural Production Infrastructure Maintenance Business Plan Expressway Corporation’s Highway Construction Specialized Specifications: slump 80 mm or greater, air content 4.5 ± 1.5%, compressive strength at least 21 MPa, splitting tensile 4.2 a chloride penetration resistance less than 4000 C. slump, content, strength, flexural ion permeability aggregate-containing concretes were measured. aggregates provided necessary presented no environmental issues. Furthermore, met target values. decreased increased increasing amounts aggregate. Mechanical testing containing aggregate established that they road pavement.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Technical Effects of Air Cooled Blast Furnace Slag on Asphalt Mixtures

Air cooled blast furnace slag is a by product made of gradually air cooled molten blast furnace slag and is often stored in stockpiles near the iron mills and usually occupy a wide area around the iron mills. From this perspective the further use of these materials can have its own merits. Air cooled blast furnace slag can be used in asphalt mixtures because of their proper frictional propertie...

متن کامل

determination of some physical and mechanical properties red bean

چکیده: در این تحقیق، برخی خواص فیزیکی و مکانیکی لوبیا قرمز به-صورت تابعی از محتوی رطوبت بررسی شد. نتایج نشان داد که رطوبت بر خواص فیزیکی لوبیا قرمز شامل طول، عرض، ضخامت، قطر متوسط هندسی، قطر متوسط حسابی، سطح تصویر شده، حجم، چگالی توده، تخلخل، وزن هزار دانه و زاویه ی استقرار استاتیکی در سطح احتمال 1 درصد اثر معنی داری دارد. به طوری که با افزایش رطوبت از 54/7 به 12 درصد بر پایه خشک طول، عرض، ضخام...

15 صفحه اول

technical effects of air cooled blast furnace slag on asphalt mixtures

air cooled blast furnace slag is a by product made of gradually air cooled molten blast furnace slag, and is often stored in stockpiles near the iron mills and usually occupy a wide area around the iron mills. from this perspective the further use of these materials can have its own merits. air cooled blast furnace slag can be used in asphalt mixtures because of their proper frictional properti...

متن کامل

Ground Granulated Blast Furnace Slag

1. Ground Granulated Blast Furnace Slag Ground Granulated Blast Furnace Slag (GGBFS) is a by product of the steel industry. Blast furnace slag is defined as “the non-metallic product consisting essentially of calcium silicates and other bases that is developed in a molten condition simultaneously with iron in a blast furnace.” [1] In the production of iron, blast furnaces are loaded with iron o...

متن کامل

Properties of Foamed Mortar Prepared with Granulated Blast-Furnace Slag

Foamed mortar with a density of 1300 kg/m³ was prepared. In the initial laboratory trials, water-to-cement (w/c) ratios ranging from 0.54 to 0.64 were tested to determine the optimal value for foamed mortar corresponding to the highest compressive strength without compromising its fresh state properties. With the obtained optimal w/c ratio of 0.56, two types of foamed mortar were prepared, name...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Applied sciences

سال: 2021

ISSN: ['2076-3417']

DOI: https://doi.org/10.3390/app11125645