Phosphate ion adsorption properties of PAN-based activated carbon fibers prepared with K2CO3 activation
نویسندگان
چکیده
منابع مشابه
Adsorption Properties of Nickel-based Magnetic Activated Carbon Prepared by Pd-free Electroless Plating
Nickel-based magnetic activated carbon was synthesized from coconut shell activated carbon by electroless plating with palladium-free activation. The effect of plating solution volume on metallic ratio and adsorption capacity were evaluated. The effect of metallic ratio on specific area, pore volume, and magnetic properties were investigated. The morphologies of activated carbon before and afte...
متن کاملRemoval of Pollutants with Activated Carbon Produced from K2CO3 Activation of Lignin From Reed Black Liquors
The activated carbon was prepared from fast precarbonization of reed lignin in the fluidized-bed followed by K2CO3 activation. The impregnation ratio was = 1:1 in this research. The effect of activation temperature upon the BET specific surface area and specific pore volume of the carbon was closely investigated. Increasing activation temperature led to an opening and widening of the porous str...
متن کاملCharacterization and Properties of Activated Carbon Prepared from Tamarind Seeds by KOH Activation for Fe(III) Adsorption from Aqueous Solution
This research studies the characterization of activated carbon from tamarind seed with KOH activation. The effects of 0.5 : 1-1.5 : 1 KOH : tamarind seed charcoal ratios and 500-700°C activation temperatures were studied. FTIR, SEM-EDS, XRD, and BET were used to characterize tamarind seed and the activated carbon prepared from them. Proximate analysis, percent yield, iodine number, methylene bl...
متن کاملOptimization of Pb(II) Adsorption onto Australian Pine Cones-Based Activated Carbon by Pulsed Microwave Heating Activation
This study proposed a novel method for preparing activated carbon from Australian Pine cones (APCs) to optimize Pb(II) adsorption. Based on an analysis conducted, the APCs dried powder consisted of approximately 51.32 wt% of cellulose and 21.15 wt% of lignin on average. Experiments in batch mode at 100-rpm stirring speed, pH 4.7 (± 0.3) and 27 oC (± 2 o</su...
متن کاملMesoporous Activated Carbon Fibers from Lignocelullosic Materials: Adsorption Studies
High surface area and highly mesoporous activated carbon fibers (ACF) were obtained by physical activation of natural precursors (vetiver roots and bagasse) with steam and chemical activation using phosphoric acid. The textural characteristics of the activated were determined by nitrogen adsorption study and mercury porosimetry and showed that interesting porosity were obtained (SBET up to 1600...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: SN Applied Sciences
سال: 2020
ISSN: 2523-3963,2523-3971
DOI: 10.1007/s42452-020-2465-1