Performance Study on an Intermediate Temperature Solid Oxide Fuel Cell (IT-SOFC) Fabricated By Dry Pressing Method
نویسندگان
چکیده
منابع مشابه
Performance modeling and parametric investigation of a solid oxide fuel cell (SOFC)
In his paper, performance modeling and parametric study of a tubular solid oxide fuel cell (SOFC) fed by hydrogen was conducted. The components of the fuel cell system and its reactions were entirely modelled and an electrochemical analysis done for it. A variety of modeling parameters including temperature, working pressure and the air mass- flow rate have been investigated in order to observe...
متن کاملCatalytic coatings on steel for low-temperature propane prereforming to solid oxide fuel cell (SOFC) application.
Catalyst layers (4-20 microm) of rhodium (1 wt%) supported on alumina, titania, and ceria-zirconia (Ce(0.5)Zr(0.5)O(2)) were coated on stainless-steel corrugated sheets by dip-coating in very stable colloidal dispersions of nanoparticles in water. Catalytic performances were studied for low-temperature (< or = 500 degrees C) steam reforming of propane at a steam to carbon ratio equal to 3 and l...
متن کاملStudy on Sm1.8Ce0.2CuO4–Ce0.9Gd0.1O1.95 composite cathode materials for intermediate temperature solid oxide fuel cell
Sm1.8Ce0.2CuO4–xCe0.9Gd0.1O1.95 (SCC–xCGO, x = 0–12 vol.%) composite cathodes supported on Ce0.9Gd0.1O1.95 (CGO) electrolyte are studied for applications in IT-SOFCs. Results show that Sm1.8Ce0.2CuO4 material is chemically compatible with Ce0.9Gd0.1O1.95 at 1000 °C. The composite electrode exhibits optimum microstructure and forms good contact with the electrolyte after sintering at 1000 °C for...
متن کاملLa0.6Sr0.4Co0.2Fe0.8O3 perovskite cathode for Intermediate Temperature Solid Oxide Fuel Cells: A comparative study
In this study the characteristics of two different kinds of La0.6Sr0.4Co0.2Fe0.8O3 (LSCF) powders, one in-house synthesized powder by a co-precipitation method and another one purchased from Fuel Cell Materials Co. (FCM Co., USA), were compared. The co-precipitated powder was prepared by using ammonium carbonate as precipitant with a NH4+/NO3- molar ratio of 2 and calcination at 1000C for 1 h....
متن کاملEffect of recycling solid oxide fuel cell products on the performance of a SOFC-Gas turbine hybrid system
In this study, the effect of recycling fuel cell products on the performance of a solid oxide fuel cell and gas turbine (SOFC-GT) hybrid system was investigated. Three types of products recycling are considered: cathode products recycling (CPR), anode products recycling (APR), and both cathode and anode products recycling (BACPR). In the present work, operating temperature and limiting curre...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: American Journal of Applied Sciences
سال: 2006
ISSN: 1546-9239
DOI: 10.3844/ajassp.2006.2020.2024