PEMODELAN UMUR FATIK ALAT PENGANGKAT ROKET KAPASITAS 20 TON MENGGUNAKAN ANSYS WORKBENCH

ANSYS Workbench User's Guide

Component Mode Synthesis in ANSYS Workbench Simulation

At ANSYS Workbench 11.0, the ANSYS Rigid Dynamics add-on module enables users to define joint connections in complex kinematic assemblies. This ability to model rigid and flexible parts in ANSYS Workbench Simulation via joints is beneficial since the rigid parts are modeled with mass and rigid links (that is, rigid contact elements), thus providing load transfer capabilities and allowing users ...

Finite Element Analysis Of Disc Brake By ANSYS Workbench

The brakes must be strong enough to stop the vehicle within a minimum distance in an emergency. The driver must have proper control over the vehicle during emergency braking and vehicle must not skid. The brakes must have good antedate characteristics their effectiveness should not decrease with prolonged application and thus it demand that the cooling of the brakes should be very efficient. Fo...

Model order reduction of large scale ODE systems : MOR for ANSYS versus ROM workbench

• A submitted manuscript is the author's version of the article upon submission and before peer-review. There can be important differences between the submitted version and the official published version of record. People interested in the research are advised to contact the author for the final version of the publication, or visit the DOI to the publisher's website. • The final author version ...

From ANSYS to System Level Simulation: MOR for ANSYS

The modern development in mathematics bridges this gap (see Fig. 1). It allows us to start from a high dimensional system obtained by finite elements and then automatically generate a low dimensional approximation. The dimension of a reduced model is controlled by the approximation error specified by the user. In this article the software MOR for ANSYS [1] is presented. MOR for ANSYS applies ne...