Parameter identification algorithm of kinematic calibration in parallel manipulators
نویسندگان
چکیده
منابع مشابه
Dynamic Parameter Identification for Parallel Manipulators
Vicente Mata1, Nidal Farhat1, Miguel Díaz-Rodríguez2, Ángel Valera3 and Álvaro Page4, Universidad Politécnica de Valencia, Departamento de Mecánica y Materiales Valencia1, Universidad de los Andes, Facultad de Ingeniería, Departamento de Tecnología y Diseño Mérida2, Universidad Politécnica de Valencia, Departamento de Ingeniería de Sistemas y Automática Valencia3, Universidad Politécnica de Val...
متن کاملKinematic Analysis of General Planar Parallel Manipulators
A kinematic mapping of planar displacements is used to derive generalized constraint equations having the form of ruled quadric surfaces in the image space. The forward kinematic problem for all three legged, three degree of freedom planar parallel manipulators thus reduces to determining the points of intersection of three of these constraint surfaces, one corresponding to each leg. The invers...
متن کاملEstimation model for kinematic calibration of manipulators with a parallel structure
This paper provides an estimation model for calibrating the kinematics of manipulators with a parallel geometrical structure. Parameter estimation for serial link manipulators is well developed, but fail for most structures with parallel actuators, since the forward kinematics is usually not analytically available for these. We extend parameter estimation to such parallel structures by developi...
متن کاملA study of kinematic models for forward calibration of manipulators
The objective of robot calibration is to identify all parameters in a robot model 80 that the model represents the true robot. h c h model has its own set of parameters. This paper proves that regardless of the kinematic model chosen, there are a maximum number of parameters that must be determined, implying that model accuracy cannot be improved by adding “extra” parameters. In addition, the p...
متن کاملKinematic Calibration of a Cartesian Parallel Manipulator
Abstract: In this paper, a prototype Cartesian Parallel Manipulator (CPM) is demonstrated, in which a moving platform is connected to a fixed frame by three PRRR limbs. Due to the orthogonal arrangement of the three prismatic joints, it behaves like a conventional X-Y-Z Cartesian robot. However, because all the linear actuators are mounted at the fixed frame, the manipulator may be suitable for...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Advances in Mechanical Engineering
سال: 2016
ISSN: 1687-8140,1687-8140
DOI: 10.1177/1687814016667908