Organic thin film deposition by glow discharge process. RF sputtering.
نویسندگان
چکیده
منابع مشابه
Fabrication of InGaN thin-film transistors using pulsed sputtering deposition
We report the first demonstration of operational InGaN-based thin-film transistors (TFTs) on glass substrates. The key to our success was coating the glass substrate with a thin amorphous layer of HfO2, which enabled a highly c-axis-oriented growth of InGaN films using pulsed sputtering deposition. The electrical characteristics of the thin films were controlled easily by varying their In conte...
متن کاملOptimization of DC reactive magnetron sputtering deposition process for efficient YSZ electrolyte thin film SOFC
Yttria-stabilized zirconia (YSZ, ZrO2:Y2O3) thin films were deposited by reactive DC magnetron sputtering with a high deposition rate from a metallic target of Zr/Y in an argon/oxygen atmosphere. Plasma parameters and composition analysis of the gas phase reveal that the sputtering process in the “compound” mode is reached for a 2.5 sccm oxygen flow rate. Deposition onto silicon in “metal” mode...
متن کاملTransparent, conductive ZnO:Al thin film deposited on polymer substrates by RF magnetron sputtering
In this paper, we present the optical, electrical, structural and mechanical properties exhibited by aluminum-doped zinc oxide (ZnO:Al) thin films produced by RF magnetron sputtering on polymeric substrates (polyethylene terephthalate, PET; Mylar type D from Dupont ) with a standard thickness of 100 mm. The influence of the uniaxial tensile strain on the electrical resistance of these films was...
متن کاملProcess Optimization of Deposition Conditions for Low Temperature Thin Film Insulators used in Thin Film Transistors Displays
Deposition process for thin insulator used in polysilicon gate dielectric of thin film transistors are optimized. Silane and N2O plasma are used to form SiO2 layers at temperatures below 150 ºC. The deposition conditions as well as system operating parameters such as pressure, temperature, gas flow ratios, total flow rate and plasma power are also studied and their effects are discussed. The p...
متن کاملNucleation and strain-stabilization during organic semiconductor thin film deposition
The nucleation mechanisms during solution deposition of organic semiconductor thin films determine the grain morphology and may influence the crystalline packing in some cases. Here, in-situ optical spectromicroscopy in reflection mode is used to study the growth mechanisms and thermal stability of 6,13-bis(trisopropylsilylethynyl)-pentacene thin films. The results show that the films form in a...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Hyomen Kagaku
سال: 1984
ISSN: 0388-5321,1881-4743
DOI: 10.1380/jsssj.5.468