Optimized polymer flooding projects via combination of experimental design and reservoir simulation
نویسندگان
چکیده
منابع مشابه
Optimized polymer enhanced foam flooding for ordinary heavy oil reservoir after cross-linked polymer flooding
A successful cross-linked polymer flooding has been implemented in JD reservoir, an ordinary heavy oil reservoir with high permeability zones. For all that, there are still significant volumes of continuous oil remaining in place, which can not be easily extracted due to stronger vertical heterogeneity. Considering selective plugging feature, polymer enhanced foam (PEF) flooding was taken as fo...
متن کاملsimulation and design of electronic processing circuit for restaurants e-procurement system
the poor orientation of the restaurants toward the information technology has yet many unsolved issues in regards to the customers. one of these problems which lead the appeal list of later, and have a negative impact on the prestige of the restaurant is the case when the later does not respond on time to the customers’ needs, and which causes their dissatisfaction. this issue is really sensiti...
15 صفحه اولsimulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
Characterization of Reservoir Heterogeneity by Capacitance-resistance Model in Water-flooding Projects
Tedious calculations and simulations are needed to obtain an efficient production scenario and/orproper field development strategy. Capacitance-resistance model (CRM) is proved to be a fastreservoir simulation tool using just the field-available data of production and injection rates. Thisapproach sets a time-constant and a weighting factor (or well-pair connectivity parameter...
متن کاملSimulation Study of Salinity Effect on Polymer Flooding in Core Scale
In this study, simulation of low salinity polymer flooding in the core scale is investigated using Eclipse-100 simulator. For this purpose, two sets of data are used. The first set of data were adopted from the results of experimental studies conducted at the University of Bergen, performed using Berea sandstone and intermediate oil. The second data set, related to sand pack and heavy oil syste...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Petroleum
سال: 2017
ISSN: 2405-6561
DOI: 10.1016/j.petlm.2017.05.006