Optimization of Wire-EDM Process Parameters on Machining Die Steel DC53 using Taguchi Method with Grey Relational Analysis – A Review
نویسندگان
چکیده
منابع مشابه
Optimization of Edm Process Parameters Using Taguchi Method: a Review
Electrical discharge machining is assessed on the basis of Material Removal Rate (MRR), Tool Wear Rate (TWR), and Surface Roughness (SR). Process parameters that mostly affected the EDM Process are Pulse on Time, Pulse off Time, Discharge Current, Arc Gap and Duty Cycle. This paper reviews research for the optimization and improvement of various performance parameters measured in the experiment...
متن کاملA Review on Optimizing Process Parameters for TIG Welding using Taguchi Method & Grey Relational Analysis
Gas tungsten arc welding (GTAW) or Tungsten inert gas welding (TIG) is one of the widely used techniques for joining ferrous and non-ferrous metal.Gas tungsten arc welding process,consist of non-consumable tungsten electrode which is used to provide the arc for welding. During the welding cycle a shield of inert gas expels the air from the welding area and prevents oxidation of the electrode, w...
متن کاملOptimization of Process Parameters in Turning of AISI 8620 Steel Using Taguchi and Grey Taguchi Analysis
The aim of this research is to investigate the optimization of cutting parameters (cutting speed, feed rate and depth of cut) for surface roughness and metal removal rate in turning of AISI 8620 steel using coated carbide insert. Experiments have been carried out based on Taguchi L9 standard orthogonal array design with three process parameters namely cutting speed, feed rate and depth of cut f...
متن کاملOptimization of gas metal arcwelding parameters of SS304 austenitic steel by Taguchi –Grey relational analysis
This study investigated the optimization of three welding parameters (wire feed speed, arc voltage, and shielding gas flow rate) for SS 304H by using Taguchi based Grey relational analysis. In this research work, pure argon was used as shielding gas. Numbers of trials were performed as per L16 (4xx3) orthogonal array design and the mechanical quality such ultimate tensile strength, microhardnes...
متن کاملOptimization of Process Parameters of Wire Electrical Discharge Machining Using Fuzzy logic Integrated with Taguchi Method
In this paper, fuzzy logic integrated with the Taguchi method is used to optimize Wire Electro Discharge Machining (WEDM) process with multiple quality characteristics. Rough machining with EDM gives poor surface finish and has micro cracks and pores. Finish machining gives better surface finish but with very poor machining speed (MRR). Spark gap width is one of the important performance measur...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal for Research in Applied Science and Engineering Technology
سال: 2018
ISSN: 2321-9653
DOI: 10.22214/ijraset.2018.6066