Optimization of Surface Finish in Cylindrical External Turning a SAE 1045 steel
نویسندگان
چکیده
منابع مشابه
Effects of Pretreatment Prior to Electroless Ni-P Plating on Fatigue Behavior of SAE 1045 Steel
Electroless Ni-P (EN) plating, as an important group of metallic coatings, employed in a wide range of industrial applications. The current work aims to investigate the effects of pretreatment process before EN plating on fatigue behavior of SAE 1045 steel. The specimens of rotating bending fatigue test were prepared from the steel in two series. A group of samples used in as-polished con...
متن کاملSimulation Approach for Surface Roughness Interval Prediction in Finish Turning
Existing simulation models used in predicting the surface roughness of a workpiece in finish turning are based on an ideal circular cutting tool nose profile. This leads to a single predicted roughness value for a given set of input parameters. In this paper, a simulation approach that considers the random tool nose profile micro-deviations as well as the tool chatter vibration to predict a rou...
متن کاملOptimization of Surface Roughness in Hard Turning of AISI 4340 Steel using Coated Carbide Inserts
The use of multilayer coated carbide tool in hard turning has several advantages over grinding process such as; reduction of processing costs, increased productivity, short cycle time, compatible surface roughness and less enviornment problems without the use of cutting fluid. In the present study, an attempt has been made to evaluate the performance of multilayer coated carbide inserts during ...
متن کاملSurface Residual Stresses in Dry Turning of 0.45% C Steel
Residual stresses in a surface layer determine many exploitation characteristics of machined surface. Depending on their kind and the type of applied loading, the influence of residual stresses can be negative or positive. Tensile residual stresses usually exert highly detrimental impact on several functional aspects such as strength, fatigue life, corrosion, wear resistance, etc., whereas comp...
متن کاملDuplex Surface Treatment of AISI 1045 Steel via Plasma Nitriding of Titanized Layer
In this Study, surface of medium carbon steel (AISI 1045) was modified by titanizing followed by plasma nitriding. Titanizing was performed using pack cementation method, in a pack mixture of ferrotitanium, ammonium chloride and alumina, at 1223 K for 45 and 180 min. Plasma-nitriding was conducted at two temperatures of 803 and 823 K for 5 h, in a gas mixture of 75%N2+25%H2. The samples were c...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Revista Gestão da Produção Operações e Sistemas
سال: 2017
ISSN: 1984-2430
DOI: 10.15675/gepros.v12i2.1640