Optimization of solvent properties for post-combustion CO2 capture using process simulation
نویسندگان
چکیده
منابع مشابه
Simulation of Co2 Capture Process
Carbon dioxide capture process has been simulated and studied under different process conditions. It has been shown that several process parameters such as lean amine temperature, number of adsorber stages, number of stripper stages and stripper pressure affect different process conditions and outputs such as carbon dioxide removal and reboiler duty. It may be concluded that the simulation of c...
متن کاملOptimal conception of a post-combustion CO2 capture unit with assessment of solvent degradation
The combination of growing energy demand and environmental concerns has made the development of CO2 capture and storage technologies a necessity for the near-future energy mix. Post-combustion CO2 capture is one of the most mature technologies for reducing CO2 emissions in power plants. As a next step for the technology development, large-scale demonstration capture plants have to be implemente...
متن کاملDetection of Degradation Products of Monoethanolamine- a Post-combustion Co2 Capture Solvent
Using solid phase extraction (SPE) combined with HPLCfluorescence/photodiode array (PDA) detection several low molecular-weight alkylamines (including ethylamine and propylamine) have been detected in the gas-phase, released during the oxidative/thermal degradation of monoethanolamine (MEA), an amine-based postcombustion CO2 capture solvent. In this study, a 30 wt% aqueous MEA solution was degr...
متن کاملControl of a post-combustion CO2 capture plant during process start-up and load variations
Dynamic and flexible operation of a carbon capture plant is important as thermal power plants must be operated very flexibly to accommodate large shares of intermittent energy sources such as wind and solar energy. To facilitate such operation, dynamic models for simulation, optimization and control system design are crucial. In this paper, we present a dynamic mathematical model for the absorp...
متن کاملWet impregnation of a commercial low cost silica using DETA for a fast post-combustion CO2 capture process
This work presents an economic and simple method to manufacture low cost, but effective adsorbents for CO2 capture through impregnating DETA to a low cost, porous silica gel. The results have demonstrated that the low cost silica gel impregnated by low molecular-weight amine is stable and work very well at a temperature up to 130 C. The developed adsorbent has a fast adsorption kinetics and can...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Greenhouse Gas Control
سال: 2020
ISSN: 1750-5836
DOI: 10.1016/j.ijggc.2020.103080