Optimization of displacement Talbot lithography for fabrication of uniform high aspect ratio gratings
نویسندگان
چکیده
Abstract Displacement Talbot lithography can rapidly pattern periodic nanostructures with high depth of focus over large area. Imperfections in the phase mask profile and stage movement inaccuracies during exposure cause linewidth variation every second line binary gratings. While this beating is barely visible patterned photoresist, it leads to substantial when transferred into aspect ratio silicon structures, because micro-loading deep reactive ion etching. A proper scan range compensated defect, a beating-free grating pitch size 1 ? m 54:1 demonstrated.
منابع مشابه
Fabrication and Characterization of High-Quality Uniform and Apodized Si3N4 Waveguide Gratings Using Laser Interference Lithography
A method is presented for fabricating high-quality ridge waveguide gratings by combining conventional mask lithography with laser interference lithography. The method, which allows for apodization functions modulating both amplitude and phase of the grating is demonstrated by fabricating a grating that is chirped by width-variation of the grated ridge waveguide. The structure was optically char...
متن کاملFabrication of high aspect ratio structures by soft UV nanoimprint lithography
We report on results of the fabrication of high aspect ratio structures by soft UV assisted nanoimprint lithography. In particular, we describe a tri-layer process which allows us to obtain a high process latitude with a good compatibility to the commonly used pattern transfer techniques such as lift-off. We show the fabrication of arrays of different geometries (pillars, stripes) over large ar...
متن کاملControlled electroplating for high-aspect-ratio zone-plate fabrication
The authors report a method for monitoring, control, and end-point detection of electroplating in nanostructures. The method is demonstrated on nickel plating into polymer molds, which is an important process in the fabrication of soft x-ray zone-plate diffractive optics. The lack of reproducibility presently limits the achievable nickel aspect ratio and, thus, reduces the zone-plate diffractio...
متن کاملFabrication of high-aspect-ratio metallic nanostructures using nanoskiving.
This communication describes the fabrication of gold structures (for example, rings) with wall thickness of 40 nm, and with high aspect ratios up to 25. This technique combines thin-film deposition of metal on a topographically patterned epoxy substrate, with nanometer-scale sectioning using a microtome in a plane parallel to the patterned substrate. The dimensions of the metal structures are d...
متن کاملFabrication of High-Aspect-Ratio Microstructures Using Excimer Lasers
An excimer laser micromachining system is developed to study the process in fabricating high-aspect-ratio microstructures. Specifically, the study experimentally examines process efficiency and the impact of changing major laser operating parameters on the resulting microstructural shapes and morphology. The materials considered in the study include glass, silicon, and aluminum. The ablation or...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Japanese Journal of Applied Physics
سال: 2021
ISSN: ['0021-4922', '1347-4065']
DOI: https://doi.org/10.35848/1347-4065/abe202