Optimization of Cutting Parameters in End Milling Process using Grey Taguchi Method
نویسندگان
چکیده
منابع مشابه
DEA-based Taguchi method for Optimization of CNC End milling Process parameters
In any machining operations, quality and productivity are the two important conflicting objectives. In order to give assurance for high productivity, some extent of quality has to be compromised. Similarly productivity will be decreased while the efforts are channelized to enhance quality. Therefore it is essential to optimize both quality and productivity simultaneously. Surface roughness and ...
متن کاملOptimization of Process Parameters in Turning of AISI 8620 Steel Using Taguchi and Grey Taguchi Analysis
The aim of this research is to investigate the optimization of cutting parameters (cutting speed, feed rate and depth of cut) for surface roughness and metal removal rate in turning of AISI 8620 steel using coated carbide insert. Experiments have been carried out based on Taguchi L9 standard orthogonal array design with three process parameters namely cutting speed, feed rate and depth of cut f...
متن کاملOptimization of the Cutting Fluids and Parameters Using Taguchi and ANOVA in Milling
In this study, two different vegetable based cutting fluids developed from refined canola and sunflower oil and a commercial type semi-synthetic cutting fluid were carried out to determine optimum conditions for tool wear and forces during milling of AISI 304 austenitic stainless steel. Taguchi L9 (3) orthogonal array was used for the experiment plan. Cutting speed, feed rate, depth of cut and ...
متن کاملA Parametric Design Study of End Milling Operation using Grey Based Taguchi Method
This paper presents the multiple response optimization of end milling parameter using grey based taguchi method. Experiments were designed and conducted based on L27 orthogonal array design The milling parameter were spindle speed, depth of cut, feed rate and pressurized coolant jet and the response was surface roughness. EN31, high carbon alloy steel which achieves a high degree of hardness an...
متن کاملOptimization of Edm Process Parameters Using Taguchi Method: a Review
Electrical discharge machining is assessed on the basis of Material Removal Rate (MRR), Tool Wear Rate (TWR), and Surface Roughness (SR). Process parameters that mostly affected the EDM Process are Pulse on Time, Pulse off Time, Discharge Current, Arc Gap and Duty Cycle. This paper reviews research for the optimization and improvement of various performance parameters measured in the experiment...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal for Research in Applied Science and Engineering Technology
سال: 2020
ISSN: 2321-9653
DOI: 10.22214/ijraset.2020.32434