Optimal placement of distributed actuators for a controlled smart elastic plate
نویسندگان
چکیده
منابع مشابه
A Customer Oriented Approach for Distribution System Reliability Improvement using Optimal Distributed Generation and Switch Placement
The reliability of distribution networks is inherently low due to their radial nature, consequently distribution companies (DisCos) usually seek to improve the system reliability indices with the minimum possible investment cost. This can be known as system-oriented reliability planning (SORP). However, there can exist some customers that are not satisfied by their reliability determined by ado...
متن کاملFinite element analysis of actively controlled smart plate with patched actuators and sensors
The active vibration control of smart plate equipped with patched piezoelectric sensors and actuators is presented in this study. An equivalent single layer third order shear deformation theory is employed to model the kinematics of the plate and to obtain the shear strains. The governing equations of motion are derived using extended Hamilton’s principle. Linear variation of electric potential...
متن کاملOptimal Placement of Actuators and Sensors for Vibration Active Control
Optimal placement of actuators and sensors is an important issue in vibration active control. An index for joint consideration of controllability and observability based on singular values of Hankel matrix is described at first, then an objective function according to the index is defined for actuator and sensor placement. A genetic algorithm procedure (GA) is adopted to solve the optimization ...
متن کاملOptimal DG Placement for Power Loss Reduction and Improvement Voltage Profile Using Smart Methods
Distributed Generations (DGs) are utilized to supply the active and reactive power in the transmission and distribution systems. These types of power sources have many benefits such as power quality enhancement, voltage deviation reduction, power loss reduction, load shedding reduction, reliability improvement, etc. In order to reach the above benefits, the optimal placement and sizing of DG is...
متن کاملPresenting a New Method Based on Branch Placement for Optimal Placement of Phasor Measurement Units
In this paper, a new method based on branch placement for the optimal positioning of Phasor Measurement Units (PMUs) in power systems is proposed. In this method, the PMUs are in type of single-channel and are installed at the beginning of the branches. Therefore, they are able to measure the bus voltages. Also, the installation of the PMUs on the branches increases the security of observabilit...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: PAMM
سال: 2003
ISSN: 1617-7061,1617-7061
DOI: 10.1002/pamm.200310116