Optical Microstructure, FESEM, Microtensile, and Microhardness Properties of LM 25-B4Cnp-Grnp Hybrid Composites Manufactured by Selective Laser Melting
نویسندگان
چکیده
The current investigation, nano-multi-powder particles, 5 and 10 wt.% boron carbide (B4C) graphite (Gr) are utilized as a reinforcement, aluminium LM 25 alloy is used matrix. These hybrid nanocomposites were fabricated by novel additive manufacturing method—selective laser melting. specimen was carried out in cylindrical size having 2 circular slots of dimension 14 length 50 mm. diverse SLM specimens focused on tribological properties impact, creep, tensile, hardness for the three with same weight percentage nanoparticles. consequence reinforcement has been performed through microtensile microhardness tests. evaluated test machine Vickers tester, prepared per ASTM E8 E18 standards. Microtensile strength augmented addition B4C tensile values 668.93 MPa 739.16 MPa, 193VHN 206.79VHN, respectively. result microstructure study shows homogeneous dispersion B4Cnp-Grnp matrix material LM25 alloy. FESEM image results ruined surface illustrate performance ductile fracture, brittle ploughing reinforced material. consequences research enhanced composite added.
منابع مشابه
control of the optical properties of nanoparticles by laser fields
در این پایان نامه، درهمتنیدگی بین یک سیستم نقطه کوانتومی دوگانه(مولکول نقطه کوانتومی) و میدان مورد مطالعه قرار گرفته است. از آنتروپی ون نیومن به عنوان ابزاری برای بررسی درهمتنیدگی بین اتم و میدان استفاده شده و تاثیر پارامترهای مختلف، نظیر تونل زنی(که توسط تغییر ولتاژ ایجاد می شود)، شدت میدان و نسبت دو گسیل خودبخودی بر رفتار درجه درهمتنیدگی سیستم بررسی شده اشت.با تغییر هر یک از این پارامترها، در...
15 صفحه اولComparison of Microstructure and Mechanical Properties of Scalmalloy® Produced by Selective Laser Melting and Laser Metal Deposition
The second-generation aluminum-magnesium-scandium (Al-Mg-Sc) alloy, which is often referred to as Scalmalloy®, has been developed as a high-strength aluminum alloy for selective laser melting (SLM). The high-cooling rates of melt pools during SLM establishes the thermodynamic conditions for a fine-grained crack-free aluminum structure saturated with fine precipitates of the ceramic phase Al₃-Sc...
متن کاملSelective laser melting of titanium alloy: investigation of mechanical properties and microstructure
This article presents the mechanical properties and microstructure of titanium alloy after selective laser melting (SLM). Titanium alloys are ideal material for selective laser melting (SLM), because they are expensive and difficult to machinery using traditional technologies. The application of SLM in the biomedical area has been slow due to the stringent performance criteria and concerns rela...
متن کاملOn the Selective Laser Melting (SLM) of the AlSi10Mg Alloy: Process, Microstructure, and Mechanical Properties
The aim of this review is to analyze and to summarize the state of the art of the processing of aluminum alloys, and in particular of the AlSi10Mg alloy, obtained by means of the Additive Manufacturing (AM) technique known as Selective Laser Melting (SLM). This process is gaining interest worldwide, thanks to the possibility of obtaining a freeform fabrication coupled with high mechanical prope...
متن کاملManufacturing and Characterization of Ti6Al4V Lattice Components Manufactured by Selective Laser Melting
The paper investigates the fabrication of Selective Laser Melting (SLM) titanium alloy Ti6Al4V micro-lattice structures for the production of lightweight components. Specifically, the pillar textile unit cell is used as base lattice structure and alternative lattice topologies including reinforcing vertical bars are also considered. Detailed characterizations of dimensional accuracy, surface ro...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Advances in Materials Science and Engineering
سال: 2022
ISSN: ['1687-8434', '1687-8442']
DOI: https://doi.org/10.1155/2022/3177172