Open-circuit dissolution of platinum from the cathode in polymer electrolyte membrane water electrolysers

نویسندگان

چکیده

Platinum is the state-of-the-art catalyst for hydrogen evolution in polymer electrolyte membrane (PEM) water electrolysers; however, its stability has only been characterized to a limited extent situ. This study measures platinum dissolving from cathode during intermittent operation of 3-electrode PEM electrolyser cell, using differential pulse voltammetry technique that provided detection limits less than 2 ng L−1. Water samples were periodically taken on-off current cycling, and periods open-circuit voltage (OCV) dissolution was detected when potential rose above 0.85 V NHE due diffusion oxygen anode. reached maximum rate at highest 1.02 NHE, gradually decayed over 90 h period. The average total amount dissolved per OCV period estimated be 152 cm−2 or 0.005% initial electrode mass. mechanism predicted same as occurring fuel cell cathodes, although being kinetically hindered electrolysers by slow anode cathode.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Tantalum carbide as a novel support material for anode electrocatalysts in polymer electrolyte membrane water electrolysers

Iridium oxide (IrO2) currently represents a state of the art electrocatalyst for anodic oxygen evolution. Since iridium is both expensive and scarce, the future practical application of this process makes it essential to reduce IrO2 loading on the anodes of PEM water electrolysers. In the present study an approach to utilising a suitable electrocatalyst support was followed. Of the materials se...

متن کامل

Making the hydrogen evolution reaction in polymer electrolyte membrane electrolysers even faster.

Although the hydrogen evolution reaction (HER) is one of the fastest electrocatalytic reactions, modern polymer electrolyte membrane (PEM) electrolysers require larger platinum loadings (∼0.5-1.0 mg cm(-2)) than those in PEM fuel cell anodes and cathodes altogether (∼0.5 mg cm(-2)). Thus, catalyst optimization would help in substantially reducing the costs for hydrogen production using this tec...

متن کامل

Evaluating Cathode Catalysts in the Polymer Electrolyte Fuel Cell

The polymer electrolyte membrane fuel cell (PEMFC) converts the chemical energy of hydrogen and oxygen (air) into usable electrical energy. At the cathode (the positive electrode), a considerable amount of platinum is generally required to catalyse the sluggish oxygen reduction reaction (ORR). This has implications regarding the cost in high-power applications, and for making a broad commercial...

متن کامل

Oxygen Mass Transport Limitations at the Cathode of Polymer Electrolyte Membrane Fuel Cells

Oxygen transport across the cathode gas diffusion layer (GDL) in polymer electrolyte membrane (PEM) fuel cells was examined by varying the O2/N2 ratio and by varying the area of the GDL extending laterally from the gas flow channel under the bipolar plate (under the land). As the cathode is depleted of oxygen, the current density becomes limited by oxygen transport across the GDL. Oxygen deplet...

متن کامل

The Effect of Platinum Electrocatalyst on Membrane Degradation in Polymer Electrolyte Fuel Cells

Membrane degradation is a severe factor limiting the lifetime of polymer electrolyte fuel cells. Therefore, obtaining a deeper knowledge is fundamental in order to establish fuel cells as competitive product. A segmented single cell was operated under open circuit voltage with alternating relative humidity. The influence of the catalyst layer on membrane degradation was evaluated by measuring a...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Journal of Power Sources

سال: 2021

ISSN: ['1873-2755', '0378-7753']

DOI: https://doi.org/10.1016/j.jpowsour.2021.229937