Numerical stress analysis for single-lap adhesive joint under thermo-mechanical load using non-linear material
نویسندگان
چکیده
منابع مشابه
The Effect of Fiber Breakage on Transient Stress Distribution in a Single-Lap Joint Composite Material
In the present study, the transient stress distribution caused by a break in the fibers of an adhesive bonding is investigated. Transient stress is a dynamic response of the system to any discontinuity in the fibers from detachment time till their equilibrium state (or steady state). To derive the governing dynamic equilibrium equations shear lag model is used. Here, it is assumed that the tens...
متن کاملAnalytical Solution of Stress Field in Adhesively Bonded Composite Single-Lap Joints Under Mechanical Loadings
In this paper, considering an adhesively bonded composite single-lap joint, a novel approach is presented to predict the peel and shear stress distributions of the adhesive layer for an ASTM standard test sample. In current method, the equilibrium equations are derived using the energy method and based on the Timoshenko’s beam theory. Two solution procedures then are discussed, one of which rep...
متن کاملExact Solution for Electro- Thermo- Mechanical Behavior of Composite Cylinder Reinforced by BNNTs under Non- Axisymmetric Thermo- Mechanical Loads
In this research, static stresses analysis of boron nitride nano - tube reinforced composite (BNNTRC) cylinder made of poly - vinylidene fluoride (PVDF) subjected to non - axisymmetric thermo - mechanical loads and applied voltage is developed. The surrounded elastic medium is modelled by Pasternak foundation. Composite structure is modeled based on piezoelectric fiber reinforced composite (PFR...
متن کاملAnalysis of adhesive-bonded single-lap joint with an interfacial crack and a void
void within the adhesive. Depending upon the number of notches and voids, the specimen is divided into several regions. Assuming that a plane strain state of deformation prevails in the specimen, we write the balance of forces and moments for each section and impose the continuity of displacements, forces and moments at the interfaces between the adjoining sections. By taking the Laplace transf...
متن کاملThe Fuzzy Finite Element Stress Analysis of Adhesive-Bonded Single Lap Joints
An adhesive-bonded single lap joint is analyzed using a new fuzzy finite element model. In the model, Young’s moduli and Poisson’s ratios of the joint materials are taken as fuzzy numbers in order to take the uncertainty of the material properties into account. The fuzzy numbers are modeled using linear triangular membership functions. At a selected material point in the adhesive layer, the pos...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IOP Conference Series: Materials Science and Engineering
سال: 2020
ISSN: 1757-899X
DOI: 10.1088/1757-899x/881/1/012070