Numerical Simulation of Melt Filling and Gas Penetration in Gas Assisted Injection Molding
نویسندگان
چکیده
منابع مشابه
3D-Simulation and Experiment of Gas Penetration Length in Gas-Assisted Injection Molding
Gas-assisted injection molding process is much complicated,the process parameters have multiplied. In this paper, a product with typical character of gas-assisted injection molded part is employed as the object of study. With the mould of gas-assisted injection molding and MPI/3D GAS in Moldflow software,the influence rule of the 6 important process parameters on gas penetration length in gas-a...
متن کاملhazard evaluation of gas condensate stabilization and dehydration unit of parsian gas refinery using hazop procedures
شناسایی مخاطرات در واحد 400 پالایشگاه گاز پارسیان. در این پروزه با بکارگیری از تکنیک hazop به شناسا یی مخاطرات ، انحرافات ممکن و در صورت لزوم ارایه راهکارهای مناسب جهت افزایش ایمنی فرا یند پرداخته میگردد. شرایط عملیاتی مخاطره آمیز نظیر فشار و دمای بالا و وجود ترکیبات مختلف سمی و قابل انفجار در واحدهای پالایش گاز، ضرورت توجه به موارد ایمنی در این چنین واحدهایی را مشخص می سازد. مطالعه hazop یک ر...
Predictive Control of Gas Injection in Natural Gas Transport Networks
The present sought to draw a comparison between Model Predictive Control performance and two other controllers named Simple PI and Selective PI in controlling large-scale natural gas transport networks. A nonlinear dynamic model of representative gas pipeline was derived from pipeline governing rules and simulated in SIMULINK® environment of MATLAB®. Control schemes were designed to provide a s...
متن کاملsimulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
consequence analysis of the leakage, ignition and explosion during high pressure sour gas injection process to the oil reservoir
there is no doubt that human being needs to become integrated with industry and industry needs to be progressed, daily. on the other hand, serious events in industrial units specially in oil industries has been shown that such damages and events are industry related ones. the consequence of such events and damages which resulted in chemical and poisoned explosions and loss of life and property ...
ذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Computer Modeling in Engineering & Sciences
سال: 2011
ISSN: 1526-1506
DOI: 10.32604/cmes.2011.082.215