Numerical Investigation on Load-carrying Capacity of High-strength Concrete-encased Steel Angle Columns
نویسندگان
چکیده
منابع مشابه
Numerical Simulation of Ultra- Strength Concrete-filled Steel Columns
Article history: Received: 11. 09. 2013. Received in revised form: 01. 10. 2013. Accepted: 15. 10. 2013. Researches into the constitutive relation of the super high strength and high performance concrete and the stress strain relationship of the ultrastrength concrete-filled steel columns are rare. Therefore, this paper based on continuous mechanics presents the relationship of mathematical des...
متن کاملFlexural Performance of High-strength Prestressed Concrete-encased Concrete-filled Steel Tube Sections
The sections composed of concrete and steel, which include concrete-encased concrete-filled tubes, generally have defects due to the low tensile strength of concrete. Therefore, an appropriate method was used for the combination of concrete-filled tubes (CFT) and prestressing strands which is encased in concrete. The conventional design guidelines are commonly developed for materials with norma...
متن کاملHigh Strength Concrete Columns under Axial Compression Load: Hybrid Confinement Efficiency of High Strength Transverse Reinforcement and Steel Fibers
Addition of steel fibers to high strength concrete (HSC) improves its post-peak behavior and energy absorbing capability, which can be described well in term of toughness. This paper attempts to obtain both analytically and experimentally the efficiency of steel fibers in HSC columns with hybrid confinement of transverse reinforcement and steel fibers. Toughness ratio (TR) to quantify the confi...
متن کاملBehavior of High-Strength Concrete Rectangular Columns
This paper summarizes the test results of an extensive research program sponsored by the US Transportation Research Board of the National Research Council to examine the behavior of high-strength concrete rectangular columns subjected to concentric and eccentric loading conditions. The variables considered in this investigation were concrete strength ranging from 7.9 ksi (55 MPa) to 16.5 ksi (1...
متن کاملBond of High Strength Concrete with High Strength Reinforcing Steel
This paper presents a study about the bond of high strength concrete with high strength steel. Fourteen pull out tests were carried out to determine the bond. The concrete strength was about 70 MPa and the steel was a 500 MPa grade. Bar diameters used were 12, 16, 20, 25, 28, 32 and 36 mm. In order to investigate the effect of cover, each test was done twice, once in a 240 mm diameter concrete ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Concrete Structures and Materials
سال: 2018
ISSN: 1976-0485,2234-1315
DOI: 10.1186/s40069-018-0238-7