Numerical Investigation of Downhole Perforation Pressure for a Deepwater Well

Solving Deepwater Well-Construction Problems

Numerical Investigation of Heat Transfer and Pressure Drop in a Corrugated Channel

The influence of variation in rib-height to channel-height ratio (e/H) on the heat transfer and pressure drop characteristics inside a channel with corrugated upper and lower plates was investigated numerically in the present study. The governing equations were solved by using finite volume approximations for a wide range of (0.06 < e/H < 0.26) and Reynolds numbers (5400 < Re < 23000), with a m...

Well-posedness of a Compressible Gas-liquid Model for Deepwater Oil Well Operations

The main purpose of this paper is two-fold: (i) to generalize an existence result for a compressible gas-liquid model with a friction term recently published by Friis and Evje [SIAM J. Appl. Math., 71 (2011), pp. 2014–2047]; (ii) to derive a uniqueness result for the same model. A main ingredient in the existence part is the observation that we can consider weaker assumptions on the initial liq...

Investigation of Slug Suppression System in Deepwater Scenario

In pipeline-riser systems, pressure fluctuations which result from the formation of large liquid slugs and gas surges due to operational changes or low mass flow rate from production wells and the profile of pipeline-riser systems often lead to trips at the inlet of the separator; and thereby, the problem causes a a loss of the production.In this study, on a sample deep-water oil field off the ...

A numerical investigation of heat transfer and pressure drop in a novel cylindrical heat sink with helical minichannels

This study numerically investigated heat transfer and fluid flow characteristics in a novel cylindrical heat sink with helical minichannels for the laminar flow of fluid with temperature-dependent properties. A finite volume method was employed to obtain the solution of governing equations. The effects of helical angle, channel aspect ratio, and Reynolds number, which were regarded as main para...