Novel Separation Technique of Particle Reinforced Metal Matrix Composites by Fused Deposition Method
نویسندگان
چکیده
منابع مشابه
Wear of ceramic particle-reinforced metal-matrix composites
Wear experiments have shown that when the applied normal stress exceeds a critical value, a transition occurs from the regime of mild wear to that of adhesive wear. As a result, the wear rate of particle-reinforced aluminium composites increases by a hundred-fold. Based on dislocation and delamination theories, a criterion is proposed for determining the critical transition load, and a quantita...
متن کاملCasting of SiC Reinforced Metal Matrix Composites
Composites based on two aluminium alloys (A536 and 6061) reinforced with 10% or 20% volume fraction of SiC particles were produced by gravity casting and a novel two-step mixing method was applied successfully to improve the wettability and distribution of the particles. The SiC particles were observed to be located predominantly in the interdendrit ic regions, and a thermal lag model is propos...
متن کاملMetal Matrix Composites Reinforced by Nano-Particles—A Review
Metal matrix composites reinforced by nano-particles are very promising materials, suitable for a large number of applications. These composites consist of a metal matrix filled with nano-particles featuring physical and mechanical properties very different from those of the matrix. The nano-particles can improve the base material in terms of wear resistance, damping properties and mechanical s...
متن کاملDamage accumulation and mechanical properties of particle-reinforced metal–matrix composites during hydrostatic extrusion
The effects of hydrostatic extrusion on particle cracking and on the subsequent tensile properties of some prototypical particlereinforced metal–matrix composites are investigated. In most cases, tensile failure occurs through a plastic instability in accordance with the Considere criterion for necking. The corresponding failure strain is therefore dictated by the global flow and hardening char...
متن کاملStrain gradient effects on deformation strengthening behavior of particle reinforced metal matrix composites
Dislocation models with considering the mismatch of elastic modulus between matrix and reinforcing particles are used to determine the effective strain gradient h for particle reinforced metal matrix composites (MMCp) in the present research. Based on Taylor relation and the kinetics of dislocation multiplication, glide and annihilation, a strain gradient dependent constitutive equation is deve...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials Science Forum
سال: 2007
ISSN: 1662-9752
DOI: 10.4028/www.scientific.net/msf.539-543.1028