Non-contact respiration monitoring using optical sensors
نویسندگان
چکیده
منابع مشابه
Monitoring of Oocyte/Embryo Respiration Using Electrochemical-Based Oxygen Sensors
Current commercially available instruments for monitoring mitochondrial respiration are incapable of single cell measurements. Therefore, we developed a three-electrode, Clark-type biosensor suitable for mitochondrial respirometry in single oocytes and embryos. The biosensor was embedded in a PMMA (polymethyl methacrylate) micro-chamber to allow investigation of single oocytes/embryos immersed ...
متن کاملNon-Contact Pulse Monitoring Using Live Imaging
In this paper, the authors describe a novel non-invasive technique for monitoring pulse rate using live imaging. This method is based on the finding that brightness of the skin varies with pulsation due to the effects of blood scattering. The technical methods for image capture and data processing are described. The mechanism of light reflection inside the skin is also described using a layer m...
متن کاملNon Contact Heart Monitoring
Heart rate is, among the many vital signs (respiration rate, blood oxygen saturation, arterial blood pressure, etc.), one of the most commonly measured and monitored. Whatever will be the sensing principle or the monitoring method used, data referred to the heart rate can be considered the primary vital sign information which is needed on a patient approach in both emergency and clinical situat...
متن کاملWeight Measurements by Using Simple Optical-Fiber Sensors (RESEARCH NOTE)
The use of different optical-fiber sensors for weighing measurements is Abstract described. By using three different mechanical stressing mechanisms, the operation of the fiber-to-fiber transducer systems are tested and the results are presented. Parameters such as sensitivity, hysteresis, resolution, and dynamic range are measured. A comparison of the results has shown that the sensor system m...
متن کاملMonitoring Pre-Stressed Composites Using Optical Fibre Sensors
Residual stresses in fibre reinforced composites can give rise to a number of undesired effects such as loss of dimensional stability and premature fracture. Hence, there is significant merit in developing processing techniques to mitigate the development of residual stresses. However, tracking and quantifying the development of these fabrication-induced stresses in real-time using conventional...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Electronics and Communications
سال: 2014
ISSN: 2312-1807,1811-4512
DOI: 10.20535/2312-1807.2014.19.1.142302