No. 4 Bending creep-test under fungal attack

Damage Detection of Carbon Fiber-reinforced Concrete Under Bending Test

Evaluation of Asphalt Mixture Low-Temperature Performance in Bending Beam Creep Test

Low-temperature cracking is one of the most common road pavement distress types in Poland. While bitumen performance can be evaluated in detail using bending beam rheometer (BBR) or dynamic shear rheometer (DSR) tests, none of the normalized test methods gives a comprehensive representation of low-temperature performance of the asphalt mixtures. This article presents the Bending Beam Creep test...

An Inverse Approach for Determining Creep Properties from a Miniature Thin Plate Specimen under Bending

This paper describes a new approach which can be used to interpret the experimental creep deformation data obtained from miniaturized thin plate bending specimen test to the corresponding uniaxial data based on an inversed application of the reference stress method. The geometry of the thin plate is fully defined by the span of the support, l, the width, b, and the thickness, d. Firstly, analyt...

Carbon Nanotubes under Bending Strain

Bending induced deformations in single walled carbon nanotubes with zigzag and armchair chirality have been studied computationally using a classical molecular dynamics simulation method. In this the interatomic forces have been described with Brenner’s empirical model potential. The results given by this classical model have been assessed by letting the most critical, i.e. the most deformed pa...

Problems of Structural Optimization Under Creep Conditions

Optimal structural design under creep conditions, initiated over 20 years ago, brings a fairly larg~ variety of problems, interesting both from theoretical and engineering point of view. Existence of the time factor leads to optimization for a prescribed lifetime and the number of independent variables in governing equations increases by one. Practical importance is connected with design of met...