Ni-W Amorphous/Nanocrystalline Duplex Composite Produced by Electrodeposition
نویسندگان
چکیده
منابع مشابه
HIGH-STRENGTH NANOCRYSTALLINE Ni-W ALLOYS PRODUCED BY ELECTRODEPOSITION
Nanocrystalline Ni-W alloys having both high ductility and high strength were produced by electrodeoisition. The plating bath for the electrodeposition contained nickel sulfate, citric acid, sodium tungstate and ammonium chloride, and was operated at various bath concentrations and conditions of electrolysis. The ductility and tensile strength of the deposited alloys are strongly influenced by ...
متن کاملPulse Reverse Electrodeposition of Spherical Ni-MWCNT Composite Skein
Watt’s bath and pulse reverse (PR) electrodeposition is used to produce spherical nickelmultiwall carbon nanotubes (Ni-MWCNT) of 2.00, 0.93, 1.63 and 6.71 μm diameter and a variety ofsize distributions. For 60 cycles, an absolute electrodeposition current of 18 A/dm2 is applied atcurrent ratios of ii = idissolution/ideposition = 0, 0.077, 0.200 and 0.368. A simple exponential equation isfitted ...
متن کاملPREPARATION AND SINTERING OF W-20%Wt Cu COMPOSITE POWDERS PRODUCED BY CO-PRECIPITATION METHOD
Abstract: materials can be fabricated by sintering of W-Cu composite powders. In this research W-20%wt Cu composite powderswas synthesized via a co-precipitation method. Precipitate obtained from a mixture of copper nitrate and ammoniumparatungstate (APT) in distilled water contained W-Cu compounds. This precipitate was washed, dried and calcinedat 550 of dried precipitate powder was determined...
متن کاملPreparation and Characterization of Ni–TiO2 Nanocomposite Coatings Produced by Electrodeposition Technique
In this paper, Ni–TiO2 nanocomposite coatings with different sizes of TiO2 nanoparticles were successfully prepared by electrodeposition process from a nickel electrolyte in which the TiO2 nanoparticles were suspended. The influence of relevant deposition parameters on the nanocomposite coating characteristics was discussed. X-ray diffractometer has been applied in order to investigate the phas...
متن کاملPreparation of Ni-Co Alloy Foils by Electrodeposition
Electrodeposition of Ni-Co alloy foils on titanium substrate was performed in an acid chloride-sulphate bath. The influences of electrodeposition parameters such as current density, temperature, pH value, cobalt sulphate and saccharin concentration on composition and current efficiency were investigated in detail. The morphology and the microstructure of deposits were analyzed by SEM and XRD, r...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: MATERIALS TRANSACTIONS
سال: 2007
ISSN: 1345-9678,1347-5320
DOI: 10.2320/matertrans.48.996