Natural Convection Heat Transfer in Eccentric Horizontal Annuli between Heated Outer Tube and Cooled Inner Tube with Different Orientation. In the Case of Elliptical Outer Tube.

Heat Transfer and Carryover in the Dryout of a Heated Vertical Tube

This work concerns dryout experiments in which a tube, initially containing water, filled up or partially filled and at 1,2 or 3 atmosphere pressures, is heated. The initial water column experience three thermal regions. The first region, called the first period, involves heating of the tube until saturation conditions are obtained in the water. Boiling of the water in the tube causes swelling ...

Heat Transfer Efficiency of Turbulent Film Boiling on a Horizontal Elliptical Tube with External Flowing Liquid

Film boiling on a horizontal elliptical tube immersed in external flowing nitrogen liquid is investigated in the present paper. The isothermal wall temperature is high enough to induce turbulent film boiling, and then a continuous vapor film runs upward over the surface. The high velocity of the flowing saturated liquid at the boundary layer is determined by potential flow theory. In addition, ...

Saturated Flow Boiling Heat Transfer in Horizontal Square Tube

Natural convection heat transfer above heated horizontal surfaces

An extensive reasoned review of the results available in the literature for free convection heat transfer from a heated flat plate facing upwards, is conducted. The review is organized in the form of a table, so as to give the reader the opportunity to compare the heat transfer data, expressed through dimensionless equations, as well as the conditions under which these data were obtained. A com...

Thermal Design Considerations and Performance Evaluation of Cryogenic Tube in Tube Heat Exchangers

Heat exchangers are the most important equipment in refrigeration processes. Design and modeling of heat exchangers operating at low temperatures are different from other regular heat exchangers. This study includes two sections. In the first section, design and modeling considerations needed for evaluating the real thermal behavior of heat exchangers at low temperatures were discussed. The...