Multiple Scattering Simulation of Pure-Mode Shear Wave in Fiber-Reinforced Composites
نویسندگان
چکیده
منابع مشابه
Multiple Scattering Simulation of Ultrasonic Shear Wave in Unidirectional Carbon/Epoxy Composites
A computational multiple scattering simulation method was applied to analyze the characteristics of the ultrasonic shear wave that propagates in unidirectional carbon-fiber-reinforced epoxy composites with its polarization direction parallel to the fibers. The numerical simulations were carried out for regular as well as random fiber arrangements and for different fiber volume fractions. The re...
متن کاملMatrix cracking of fiber-reinforced ceramic composites in shear
The mechanics of cracking in fiber-reinforced ceramic matrix composites (CMCs) under general loadings remains incomplete. The present paper addresses one outstanding aspect of this problem: the development of matrix cracks in unidirectional plies under shear loading. To this end, we develop a model based on potential energy differences upstream and downstream of a fully bridged steady-state mat...
متن کاملShear Strength of Fiber-Reinforced Clayey Sands
Consolidated-drained triaxial compression tests were conducted to compare the stress-strain and volume change response of sands and clayey sands reinforced with discrete randomly distributed poly-propylene fibers. The influence of various test parameters such as fiber content (0.0%, 0.5% and 1.0% by weight), clay content (0%, 10% and 20% by weight), relative density (50% and 90%) and confining ...
متن کاملStrong Influence of a Small Fiber on Shear Stress in Fiber-Reinforced Composites
In stiff fiber-reinforced material, the high shear stress concentration occurs in the narrow region between fibers. With the addition of a small geometric change in crosssection, such as a thin fiber or a overhanging part of fiber, the concentration is significantly increased. This paper presents mathematical analysis to explain the rapidly increased growth of the stress by a small particle in ...
متن کاملCarbon Fiber Reinforced Bismaleimide Composites
Bismaleimide (BMI) resins are developed very rapidly due to the demands of the defense and aerospace industries. They are cross-linked polymers which process like epoxy resins but have an upper use temperature of 230°C, compared to the epoxy upper use temperature of 175°C. Also due to the available intrinsic properties of BMI resins such as higher thermal stability and lower toxicity than those...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Society of Materials Science, Japan
سال: 2003
ISSN: 1880-7488,0514-5163
DOI: 10.2472/jsms.52.1122