Multifunctional sandwich-structured double-carbon-layer modified SnS nanotubes with high capacity and stability for Li-ion batteries
نویسندگان
چکیده
N-doped double-carbon-layer protective hierarchical structures decorating SnS nanotubes (N-DCSNs) as a remarkable LIBs anode showing high-capacity retention and long-term stability properties due to the special structure of double carbon layer.
منابع مشابه
Multifunctional Sandwich‐Structured Electrolyte for High‐Performance Lithium–Sulfur Batteries
Due to its high theoretical energy density (2600 Wh kg-1), low cost, and environmental benignity, the lithium-sulfur (Li-S) battery is attracting strong interest among the various electrochemical energy storage systems. However, its practical application is seriously hampered by the so-called shuttle effect of the highly soluble polysulfides. Herein, a novel design of multifunctional sandwich-s...
متن کاملHigh-Capacity, Microporous Cu6Sn5–Sn Anodes for Li-Ion Batteries
Three-dimensional, microporous Cu6Sn5–Sn architectures were created by electrodeposition of copper and tin onto sintered copper foam substrates and evaluated as anodes for lithium-ion batteries. The electrodes were characterized before and after cycling by X-ray diffraction, scanning electron microscopy, and energy-dispersive X-ray spectrometry. Before cycling, the electrochemically deposited f...
متن کاملMoO3 nanoparticles dispersed uniformly in carbon matrix: a high capacity composite anode for Li-ion batteries
AMoO3–carbon nanocomposite was synthesized from amixture ofMoO3 and graphite by a controlled ball milling procedure. The as-prepared product consists of nanosized MoO3 particles (2–180 nm) homogeneously distributed in carbon matrix. The nanocomposite acts as a high capacity anode material for lithium-ion batteries and exhibits good cyclic behavior. Its initial capacity exceeds the theoretical c...
متن کاملHigh rate capability caused by surface cubic spinels in Li-rich layer-structured cathodes for Li-ion batteries
Modified Li-rich layered cathode Li(Li0.2Mn0.54Ni0.13Co0.13)O2 has been synthesized by a simple strategy of using surface treatment with various amounts (0-30 wt.%) of Super P (carbon black). Based on detailed characterizations from X-ray diffraction (XRD), high resolution transmission electron microscope (HRTEM), X-ray photoelectron spectroscopy (XPS) and electrochemical impedance spectroscopy...
متن کاملSnO2 Nanowires on Carbon Nanotube Film as a High Performance Anode Material for Flexible Li-ion Batteries
Today, Li-ion batteries (LIBs) are the most common rechargeable batteries used in electronic devices. SnO2 with theoretical specific capacity of 782 mAh/g is among the best anode materials for LIBs. In this report, Three-dimensional SnO2 nanowires (NWs) on carbon nanotube (CNT) thin film (SnO2 / CNT) is fabricated using a combination of vacuum filtration and thermal evaporation techniques. The ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials advances
سال: 2022
ISSN: ['2633-5409']
DOI: https://doi.org/10.1039/d2ma00017b