Motion Strain of Three-Layered Composite Device of Polymer Film Coated with Magnetostrictive SmFe3.6 Hydrogen Absorbed LaNi5 Alloys
نویسندگان
چکیده
منابع مشابه
Flexible Display Device with Organic Composite Film
This study presents the fabrication process and display characteristics of a flexible organic polymer display device that consists of a thin substrate of Polyether Sulfone, a multilayer serpentine-type microheater array that is fabricated on the substrate, and a UV-sensitive polydiacetylene (PDA)-polyvinyl alcohol (PVA) composite film. A retention time of one second is achieved with cell sizes ...
متن کاملan investigation of the types of text reduction in subtitling: a case study of the persian film gilaneh with english subtitles
چکیده ندارد.
15 صفحه اولElectrochemical preparation and characteristics of Ni–Co–LaNi5 composite coatings as electrode materials for hydrogen evolution
Electrocatalytic activity for the hydrogen evolution reaction on Ni–Co–LaNi5 composite electrodes prepared by electrochemical codeposition technique was evaluated. The relationship between the current density for hydrogen evolution reaction and the amount of LaNi5 particles in Ni–Co baths is like the well-known “volcano plot”. The Surface morphology and microstructure of Ni–Co–LaNi5 coatings we...
متن کاملHigh performance dielectric film using SiO2-coated short carbon nanotubes in BaTiO3-polymer composite
Three-phase composite films consisting of BaTiO3/singlewalled carbon nanotube (SWCNT)/polymer were fabricated. The SWCNTs were shortened and coated with SiO2 to minimise the conducting paths of the SWCNTs in the film. The film showed a dielectric constant and dielectric loss of 92 and 0.031, respectively, at a frequency of 1 kHz. The SiO2-coated short SWCNTs can play important roles in enhancin...
متن کاملMechanical properties of magnetostrictive iron-gallium alloys
Single crystal specimens of Fe-17 at. % Ga were tested in tension at room temperature. Specimens with a tensile axis orientation of [110] displayed slip lines on the specimen faces corresponding to slip on the {110}with a critical resolved shear stress of 220 MPa. Yielding began at 0.3% elongation and 450 MPa. An ultimate tensile strength of 580 MPa was observed with no fracture occurring throu...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Institute of Metals
سال: 2006
ISSN: 0021-4876,1880-6880
DOI: 10.2320/jinstmet.70.646