Morphology and Elastomeric Properties of Isotactic Polypropylene/Hydrogenated Polybutadiene Blends
نویسندگان
چکیده
منابع مشابه
Role of covalent bond formation in morphology and properties of PP/PP-g-PS binary blends
PP-g-PS copolymer is a typical compatilizer used in polypropylene and polystyrene immiscible blends. PP-g-PS copolymers with different side chain lengths were synthesized, and their thermal and mechanical properties were characterized by differential scanning calorimetry (DSC), polarizing optical microscopy (POM) and dynamic mechanical analysis (DMA), respectively. The DSC and POM results show ...
متن کاملMorphology and Mechanical Properties Investigation of Binary Polymer Blends Based on PP/SEBS and PP/PC
In this study, eight binary blends of polypropylene (PP)/ poly [styrene-b-(ethylene-co butylene)-b-styrene] tri-block copolymer (SEBS) and polypropylene (PP)/ polycarbonate (PC) were produced at different composition through twin screw extruder. The composition of the minor phases was changed to correlate the morphology and mechanical properties of binary blends (PP/PC and PP/SEBS) through ther...
متن کاملEffective Parameters on the Phase Morphology and Mechanical Properties of PP/PET/SEBS Ternary Polymer Blends
In this work, ternary polymer blends based on polypropylene (PP)/ polyethylene terephthalate (PET) /poly(styrene-b (ethylene-co-butylene)-b-styrene) (SEBS) triblock copolymer and a reactive maleic anhydride grafted SEBS (SEBS-g-MAH) at various compositions were prepared by co-rotating twin screw extruder. The effects of PET, SEBS and SEBS-g-MAH compatibilizer on morphology of the blends were ex...
متن کاملMorphology and properties of soy protein and polylactide blends.
Blends of soy protein (SP) and a semicrystalline polylactide (PLA) were prepared using a twin-screw extruder. The melt rheology, phase morphology, mechanical properties, water resistance, and thermal and dynamic mechanical properties were investigated on specimens prepared by injection molding of these blends. The melt flowability of soy-based plastics was improved through blending with PLA. Sc...
متن کاملLDPE and poly(1-butene) blends: Morphology, crystallinity and rheological properties
In this work, the compatibility and crystallinity of low density polyethylene (LDPE) and polybutene-1 (PB-1) blends were studied. Various blends of LDPE/PB-1 containing 5, 10 and 20 wt.% PB-1 were prepared in a corotating twin-screw extruder and characterized by scanning electron microscopy (SEM), shear oscillation rheology and wide-angle X-ray diffractometry (WAXD). A matrix-droplet morphology...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Polymer Journal
سال: 2000
ISSN: 0032-3896,1349-0540
DOI: 10.1295/polymj.32.915