Molten Metal Flow through Solid Network in Semi-Solid Al–Si Alloy
نویسندگان
چکیده
منابع مشابه
The T6 Heat Treatment of Semi-Solid Metal Processed Alloy A356
A solution treatment of 1 hour at 540 o C provided the best results for rheocast alloy A356-T6. Natural aging has a significant influence on the subsequent artificial aging response of the alloy. Arrhenius-type equations were derived to predict the time-to-peak hardness as a function of artificial aging temperature.
متن کاملFLOW BEHAVIOR OF MOLTEN METAL IN ALUMINUM LFC PROCESS
The effects of gating system and pattern geometry on the metal flow in the lost foam casting (LFC) process have been investigated using glass covered mold and video recording system. Unlike convectional casting process, the type of the gating system showed little effect on fillability in lost foam, but pattern thickness had large effect on mold filling. The mold filling behavior seems to be con...
متن کاملSolid electrolyte interphase in semi-solid flow batteries: a wolf in sheep's clothing.
The formation of the alkyl carbonate-derived solid electrolyte interphase (SEI) enables the use of active materials operating at very cathodic potentials in Li-ion batteries. However, the SEI in semi-solid flow batteries results in a hindered electron transfer between a fluid electrode and the current collector restricting the operating potentials to ca. 0.8 V vs. Li/Li(+) for EC-based electrol...
متن کاملHybrid Molten/Solid In2O3-Bi2O3 Oxygen Ion Transport Membranes
The hybrid molten/solid In2O3 - 30-48 wt.% Bi2O3 oxide materials were studied with respect to their transport properties. The conductivities, oxygen ion transport numbers and oxygen permeation fluxes have been measured by using the four-probe DC, volumetric measurements of the faradaic efficiency and gas flow techniques, respectively. We show that the...
متن کاملOrthogonal Experiment in Rheocasting-Rolling for Semi-Solid Magnesium Alloy Used by Slope and Mechanical Stirring
The experiment of the rheocasting-rolling for semi-solid magnesium was carried out on the equipment made by ourselves in our laboratory. Semi-solid AZ91D magnesium slurry was prepared by cooling slope and mchanical sirring The evolution of microstructure under different technological parameters were studied. The results show that the technological parameters have great influence on the microstr...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: MATERIALS TRANSACTIONS
سال: 2005
ISSN: 1345-9678,1347-5320
DOI: 10.2320/matertrans.46.1897