Modelling for the Efficient Effluent Dye Removal to Reuse Water and Salt
نویسندگان
چکیده
The objective of this work was to determine the optimal conditions for electrooxidation treatment in order decolourise effluents that contain reactive dyes. According results, when Na2SO4 is used as an electrolyte, decolouration reactions follow first-order kinetics. However, NaCl present effluent, kinetics stabilised after applying a minimal electric current value. models obtained from results show higher concentration NaCl, lower energy consumption. On other hand, increase dye leads electrical In relation pH, it not key factor efficiency. Finally, model applied two real effluents. feasibility individually treating dyeing process and those subsequent wash-off evaluated. From industrial application point view, recommended mix both before treatment, especially high.
منابع مشابه
Salt Tolerant Forages for the Reuse of Saline Drainage Water
Current practices for handling drainage water in the western San Joaquin Valley (WSJV) are not sustainable. The soil quality of 300,000 ha of land in the WSJV is adversely affected by the presence of shallow or perched water (0 to 1.5 m). Without a means of disposing of drainage water, increasing amounts of farmland in the WSJV will become salt impaired, and will be removed from production. Usi...
متن کاملA Study on Membrane Bioreactor for Water Reuse from the Effluent of Industrial Town Wastewater Treatment Plant
Background: Considering the toxic effects of heavy metals and microbial pathogens in industrial wastewaters, it is necessary to treat metal and microbial contaminated wastewater prior to disposal in the environment. The purpose of this study is to assess the removal of heavy metals pollution and microbial contamination from a mixture of municipal and industrial wastewater using membrane biorea...
متن کاملMontmorillonite as Efficient Nanoclay for Removal of Aniline Blue Dye: Optimization, Isotherm and Kinetic Study
In this study, montmorillonite clay was used as the adsorbent for the removal of Aniline Blue dye, from aqueous solution by the batch adsorption technique under different conditions. The maximum removal of aniline blue dye for initial dye concentration 20 mg/L was more than 95% at optimum conditions (pH=4.5, contact time=30 min, and adsorbent dosage=2 g/L). The data of this study were fitted wi...
متن کاملMembrane Biological Reactors (MBR) and Their Applications for Water Reuse
The term 'membrane bioreactor' expresses a combination of activated sludge and membrane separation processes. The need to processes like sedimentation and disinfection used in common methods is eliminated through MBR systems in a way that membranes are placed into or out of an aeration tank and the vacuumed wastewater created by the suction pump is pulled up from inside the membranes and leaves...
متن کاملMembrane Biological Reactors (MBR) and Their Applications for Water Reuse
The term 'membrane bioreactor' expresses a combination of activated sludge and membrane separation processes. The need to processes like sedimentation and disinfection used in common methods is eliminated through MBR systems in a way that membranes are placed into or out of an aeration tank and the vacuumed wastewater created by the suction pump is pulled up from inside the membranes and leaves...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Processes
سال: 2022
ISSN: ['2227-9717']
DOI: https://doi.org/10.3390/pr10102024