Modeling, Simulation and Optimization of Hollow Fiber Membrane Contactors for Dispersion-Free Liquid-Liquid Extraction

نویسندگان
چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Mathematical Modeling and Numerical Simulation of CO2 Removal by Using Hollow Fiber Membrane Contactors

Abstract In this study, a mathematical model is proposed for CO2 separation from N2/CO2 mixtureusing a hollow fiber membrane contactor by various absorbents. The contactor assumed as non-wetted membrane; radial and axial diffusions were also considered in the model development. The governing equations of the model are solved via the finite...

متن کامل

Modeling and Simulation of CO2 Absorption Enhancement in Hollow-Fiber Membrane Contactors using CNT–Water-Based Nanofluids

Absorption of CO2 from a gas mixture containing CO2 and nitrogen by water-based CNT nanofluids in gas–liquid hollow fiber membrane contactor was modeled and solved using COMSOL Multiphysics 5.4. The model assumed partial wetting of the membrane, along with diffusion in the axial and radial directions. In addition, Brownian motion and grazing effects were both considered in the model. The main c...

متن کامل

Stagewise Modeling of Liquid-Liquid Extraction Column (RDC)

Stagewise forward mixing model considering coalescence and redispersion of drops was used to predict the performance of Rotating Disc Liquid-Liquid Extraction Contactors. Experimental data previously obtained in two RDC columns of 7.62cm diameter, 73.6cm height and 21.9cm diameter, 150cm height were used to evaluate the model predictions. Drop-side mass transfer coefficients were predicted appl...

متن کامل

Optimization Extraction of Terbium by Supported Liquid Membrane Using D2EHPA and TOPO

The extraction of Terbium (III)from aqueous nitrate solutions with a supported liquid membrane was investigated using a mixture of di-(2-ethylhexyl phosphoric acid (D2EHPA) and tri-octyl phosphine oxide (TOPO) with a molar ratio 1/0.4. The Hydrophobic Polyvinylidene Fluoride (PVDF) membrane was used as solid support. The sorption process followed pseudo-second-o...

متن کامل

Microporous hollow fibre membrane modules as gas- liquid contactors Part 2. Mass transfer with chemical reaction

Absorption determined by mass transfer in the liquid is described well with the Graetz-L&&que equation adapted from heat transfer. The influence of a chemical reaction on the mass transfer was simulated with a numerical model and tested on the absorption of CO2 in a hydroxide solution. Absorption determined by mass transfer in the gas phase and the pores of the membrane was also analysed experi...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Procedia Engineering

سال: 2012

ISSN: 1877-7058

DOI: 10.1016/j.proeng.2012.08.750