Modeling Nickel Microstructural Evolution in Ni-YSZ Electrodes Using a Mathematical Morphology Approach
نویسندگان
چکیده
Microstructural evolution of Nickel in Ni-YSZ fuel electrodes is one the main limiting degradation mechanisms solid oxide cells [1]. The redistribution ascribed to its high mobility and low wettability with YSZ, related interfacial surface tensions. Practically, manifests as agglomeration Ni, potentially accompanied by migration, mainly reported electrolysis mode.
منابع مشابه
Three-Dimensional Microstructural Imaging of Sulfur Poisoning-Induced Degradation in a Ni-YSZ Anode of Solid Oxide Fuel Cells
Following exposure to ppm-level hydrogen sulfide at elevated temperatures, a section of a solid oxide fuel cell (SOFC) Ni-YSZ anode was examined using a combination of synchrotron-based x-ray nanotomography and x-ray fluorescence techniques. While fluorescence measurements provided elemental identification and coarse spatial mapping, x-ray nanotomography was used to map the detailed 3-D spatial...
متن کاملPhase-field Modeling with CALPHAD and CVM for Microstructural Evolution of Ni-base Superalloy
To perform a quantitative simulation using the Phase Field Method (PFM) in a real alloy system, a new strategy of modeling the microstructure evolution of Ni-base superalloy is proposed in the present paper. In this strategy, the Calculation Phase Diagram (CALPHAD) method and Cluster Variation Method (CVM) are combined with the PFM, in which the four sub-lattice model is used to evaluate the fr...
متن کاملExploring 3D microstructural evolution in Li-Sulfur battery electrodes using in-situ X-ray tomography
Lithium sulfur (Li-S) batteries offer higher theoretical specific capacity, lower cost and enhanced safety compared to current Li-ion battery technology. However, the multiple reactions and phase changes in the sulfur conversion cathode result in highly complex phenomena that significantly impact cycling life. For the first time to the authors' knowledge, a multi-scale 3D in-situ tomography app...
متن کاملManufacture of Electroless Nickel/YSZ Composite Coatings
The paper discusses optimising work on a method of processing ceramic / metal composite coatings for various applications and is based on preliminary work on processing anodes for solid oxide fuel cells (SOFCs). The composite coating is manufactured by the electroless co-deposition of nickel and yttria stabilised zirconia (YSZ) simultaneously on to a ceramic substrate. The effect on coating cha...
متن کاملAdomian Decomposition Approach to a Mathematical Modeling and Analysis of Potentiometric and Amperometric Enzyme Electrodes
A mathematical model to describe the concentration of profiles and flux for potentiometric and amperometric enzyme electrodes and of enzyme reactors has been developed. This model contains a non-linear term related to Micahlies-Menten kinetics. Analytical expressions pertaining to the substrate concentration and product concentration were reported for all values of parameters P S , and . ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Meeting abstracts
سال: 2021
ISSN: ['2151-2043', '2152-8365', '2151-2035', '1091-8213']
DOI: https://doi.org/10.1149/ma2021-031173mtgabs