Modeling laser drilling in percussion regime using constraint natural element method
نویسندگان
چکیده
منابع مشابه
New Experimental Approach to Study Laser Matter Interaction during Drilling in Percussion Regime
Laser drilling is a well-established process in aerospace industry. However quality and geometry of holes do not get under control in an absolute way. Moreover, drilling understanding is complicated due to the number of parameters and physical phenomena. Laser and matter have some own parameters which are not constant with temperature, and so could not be fitted. In this paper, we describe the ...
متن کاملExperimental Study in the Process Parameters in Laser Percussion Drilling
In order to service and grow in the present day of global competition, every manufacturing concern focuses mostly on two factors i.e. productivity and quality. Laser drilling is a popular non-traditional machining technique for producing large numbers of cooling holes of various sizes (less than mm diameter) and angles in modern aerotech components such as turbine blades, injector nozzles, and ...
متن کاملModels for Solidification and Splashing in Laser Percussion Drilling
This paper studies systems of partial differential equations modelling laser percussion drilling. The particular phenomenon considered in detail is the ejection of the thin layer of molten material. This thin layer is modelled as an inviscid flow between the fluid surface and fluid/solid interface, both of which are unknown moving boundaries. Through a regular asymptotic expansion, the governin...
متن کاملInvestigation of the Nd:YAG laser percussion drilling process using high speed filming
1. Abstract Modem aerospace gas turbines require large numbers of small diameter holes « 1 mm) to provide cooling in the turbine blades, nozzle guide vanes, combustion chambers and afterburner. A typical modem engine will have 1 00,000 such holes. Such holes can be successfully produced by laser trepanning, but this is a relatively slow process compared with laser percussion drilling. With perc...
متن کاملMeasurement of laser absorptivity for operating parameters characteristic of laser drilling regime
Laser drilling in the percussion regime is commonly used in the aircraft industry to drill sub-millimetre holes in metallic targets. Characteristic laser intensities in the range of 10 MW cm−2 are typically employed for drilling metallic targets. With these intensities the temperature of the irradiated matter is above the vaporization temperature and the drilling process is led by hydrodynamic ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Material Forming
سال: 2015
ISSN: 1960-6206,1960-6214
DOI: 10.1007/s12289-015-1269-0